Hi All,

Currently I am facing some issues while adding a node to an engine.
Host comes up initially. Then goes to Non-operational state. On trying to 
activate the host, it again comes up. Then goes to Non-operational state again 
and so on.

The following message is seen in the engine Events log multiple times -
Bridged network ovirtmgmt is attached to multiple interfaces: eth2,eth0 on Host 
...

The following is seen in the engine logs -
2013-06-06 20:52:23,003 INFO  
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] 
(DefaultQuartzScheduler_Worker-16) Host '...' moved to Non-Operational state 
because interface/s 'eth0, ' are down which needed by network/s 'ovirtmgmt, ' 
in the current cluster

Additional info:
The host is a physical machine. The contents of the file 
/etc/sysconfig/network-scripts/ifcfg-ovirtmgmt -

# cat /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt 
DEVICE=ovirtmgmt
TYPE=Bridge
ONBOOT=yes
DELAY=0
BOOTPROTO=dhcp
NM_CONTROLLED=no

The contents of /etc/sysconfig/network-scripts/ifcfg-eth2

# cat /etc/sysconfig/network-scripts/ifcfg-eth2
DEVICE="eth2"
BRIDGE="ovirtmgmt"
BOOTPROTO="dhcp"
HWADDR="00:25:90:93:62:02"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"

The contents of /etc/sysconfig/network-scripts/ifcfg-eth0 - 

# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
HWADDR="00:25:90:7C:2C:7A"
NM_CONTROLLED="yes"
ONBOOT="yes"


Can someone give some suggestion for this issue!

Thanks and Regards,
Tim
_______________________________________________
vdsm-devel mailing list
vdsm-devel@lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/vdsm-devel

Reply via email to