-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Austin Murphy
Sent: February 7, 2006 2:58 PM
To: veritas-bu@mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] performance?
It looks like you are maxing out your Gigabit ethernet cards.
My performance measurements of Gigabit ethernet were at best ~35MB/sec
for one normal gigabit link. The only numbers I saw on the internet
that were substantially higher used jumbo frames.
I'm using an E450 (4x 296MHz) with a 4-port GigaSwift (2 ports live,
2 offline). I restricted the storage unit to only use 2 drives
(LTO-2) at once, each of which maxes out at ~30MB/sec native.
If you added a 4x GigaSwift card (or two) and arranged your network to
make use of the extra Gigabit links, you could pump more data to your
tapes. If you can spend a bit more money you might try a faster
technology like 10GbE or IP over Fibrechannel. Beyond that I think
you are looking at a media server.
Austin Murphy
On 2/7/06, Paul Keating <[EMAIL PROTECTED]> wrote:
I'm running a Sunfire V880.
4x 1.2 GHz Ultrasparc III+ proc.
8 Gig Ram
6 internal 72 Gig disks.
1st pair disks mirrored OS /, /usr, /opt, etc etc
2nd pair disks mirrored /opt/openv (replicated to a standby
system using
Veritas Volume Replicator)
3rd pair disks one slice mirrored for VVR's SRL logs
remainder of the two disks concatenated
into a 96 Gig FS
for a DSSU for a couple of small clients on 10Mb/s HD
encrypted links.
Pair of FC200 HBAs in 66MHz PCI slots
Pair of GigaSwift GigE cards in 33MHz PCI slots (only 2
66Mhz slots on the
machine.)
the HBAs each feed 7 tape drives and 1 robot.....using Inline tape
copy.....the robots are essentially mirrored....one onsite,
one at the end
of a DWDM link.
I previously had only 3 drives at each site.....and added
the additional 4
at each site two weeks ago.
with the 3 drives per site, I was getting approx 60MB/s
total date to the
three drives...so an avg of 20MB/s drive.
The addidional drives were added for resiliency (Mgmt
wanted two stus, one
for dev, one for prod servers..so now we have a stu with 4
drives avail for
prod, and 3 drives avail for dev)
in the case where a client or two stuck at half duplex
hangs up a drive all
night, the remainder of jobs can finish...
The problem is that, after adding the new tape drives, we
don't get any more
total throughput....seemd stuck at about 60-65MB/s, but now
spread among
twice the tape drives.
This means that since more machines are backing up
concurrantly (allowed
because of the increased number of drives) that each
machine is backing up
slower...in effect, each machine is taking twice as long to back
up....causing some major issues.
Anyone know of any particular configs or issues that may be
affecting us
here? benchmarks on processing required to manage this many
ITC jobs? we
didn't see a performance hit in the lab, but never had this
big of a system
in the lab to really load it.
I've been doing consant IOstat and netstat monitoring....no
waits/queues/errors/collisions anywhere, except at one
point for about 15
minutes during the FULL window on the weekend, a few waits
accumulated on
the disks the /opt/openv resides on....but the performance
was the same
during that period as the remaining 24+ hours, where there
were no waits.
any new ideas would be welcome.
Thanks,
Paul
==============================================================
======================
La version française suit le texte anglais.
--------------------------------------------------------------
----------------------
This email message from the Bank of Canada is given in good
faith, and shall
not be
binding or construed as constituting any obligation on the
part of the Bank.
This email may contain privileged and/or confidential
information, and the
Bank of
Canada does not waive any related rights. Any distribution,
use, or copying
of this
email or the information it contains by other than the
intended recipient is
unauthorized. If you received this email in error please delete it
immediately from your system and notify the sender promptly by email
that
you have done so.
Recipients are advised to apply their own virus checks to
this message upon
receipt.
--------------------------------------------------------------
----------------------
L'information communiquée dans les courriels en provenance
de la Banque du
Canada
est soumise de bonne foi, mais elle ne saurait lier la
Banque et ne doit
aucunement
être interprétée comme constituant une obligation de sa part.
Le présent courriel peut contenir de l'information privilégiée ou
confidentielle. La Banque du Canada ne renonce pas aux droits qui s'y
rapportent. Toute
diffusion,
utilisation ou copie de ce courriel ou des renseignements
qu'il contient par
une
personne autre que le ou les destinataires désignés est
interdite Si vous
recevez
ce courriel par erreur, veuillez le supprimer immédiatement
et envoyer sans
délai à
l'expéditeur un message électronique pour l'aviser que vous
avez éliminé de
votre
ordinateur toute copie du courriel reçu.
Dès la réception du présent message, le ou les
destinataires doivent activer
leur
programme de détection de virus pour éviter toute
contamination possible.
_______________________________________________
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
