Barber, Layne (Contractor) wrote: > > * Starting robtest > o robtest > o 1 --> to select TLD 0 > * Getting help > o ? > * Looking at contents of the tape drives > o s d > * Looking at the contents of the library > o s s > * Moving a tape from a drive to a library slot > o s d --> to identify drive number that has tape (Contains > Cartridge = yes, Barcode=XXXXXX) > o s s --> to identify an empty slot in the tape library > (Netbackup will need to be re-inventoried) > o m d# s# --> from from drive # to slot # > o s d --> verify the tape drive is empty > o s s --> verify the library slot has the tape > > > ------------------------------------------------------------------------ > *From:* [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] *On Behalf Of *Justin > Piszcz > *Sent:* Wednesday, March 08, 2006 08:13 > *To:* veritas-bu@mailman.eng.auburn.edu > *Subject:* [Veritas-bu] robtest documentation? > > I need to move a tape in drive 3 to a slot in the robot, is there a > document in how to use robtest? > > Thanks, > > Justin. You can also do this within scripts if you like ( something i found out a while ago ), so you can automatically move stuff.
echo "m s3 d3" | tldtest -r /dev/sg/c0t0l0 <- whatever robot path is. In a script i just get the robot path like this :- if [ -s /tmp/robot ];then robot=`cat /tmp/robot` else robot=`/opt/openv/volmgr/bin/sgscan |awk -F: '/P1000/ {print $1}'` echo $robot > /tmp/robot fi echo "s s" | /opt/openv/volmgr/bin/tldtest -r $robot > /tmp/tapes-in-robot ......blah blah hope it helps Dave _______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu