Hi Simon, I have two different tape libraries at two different locations with multiple media servers and all pointed to the same master server. I have also one library with LTO2 and LTO3 tape drives in mix and I have no any issues with the config. Let me know what is exactly not working for you?
Thank you, Boris On Wed, Feb 25, 2009 at 3:02 AM, WEAVER, Simon (external) < [email protected]> wrote: > All, > I don't belive that what I am doing is an unsupported configuration, but I > thought I would pose this question in case I am going to make myself look > stupid. > > Environment > > Win2k3 SP2 NBU 5.1 MP5 Master + 6 SAN Media SSO Using Single LTO3 Robot > Introduced new LTO4 Robot to the Master and its seen as TLD (1). > > Performed test backups to the new Robot, and all is well. > > On one of the SAN Media SSO Servers, I configured a new Storage Unit so 2 > Servers could now see TLD(1). > Performed Test backups and all looks ok ...... until I notice a drive go > down that is in use. I then UP the drive, but after 2 mins it goes down > again. > > Event Logs for Application showed "GetTapeParameters() failed on drive > HPUltrium4-SCSI0 (device 8, *\\.\Tape9*): The requested resource is in > use." The Source event was from NetBackup AVR Daemon. > > So I decided not to perform any backups for last night, and changed the > Policy back to the LTO3. Instead, as another test, some of my LAN Based > Policies that were using LTO3 have now been set to use the LTO4 Storage > Unit. > > Came in this morning to find 1,500 jobs all hung, or active but not > running, status 2, status 196, status 50. > > Took the environment down, cleared all failed jobs, and set all policies > back to LTO3, so I can get good backups now. > > The Master is currently the only one "now" using the LTO4 and as a test, > doing a simple file level backup. > > Question: Anyone running multiple robots with 1 Master, and have seen > problems like this? > Just off to investigate some of the errors..... Thanks > > *Regards* > > *Simon** * > > This email (including any attachments) may contain confidential > and/or privileged information or information otherwise protected > from disclosure. If you are not the intended recipient, please > notify the sender immediately, do not copy this message or any > attachments and do not use it for any purpose or disclose its > content to any person, but delete this message and any attachments > from your system. Astrium disclaims any and all liability if this > email transmission was virus corrupted, altered or falsified. > -o- > Astrium Limited, Registered in England and Wales No. 2449259 > Registered Office: > Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England > > > _______________________________________________ > Veritas-bu maillist - [email protected] > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu > >
_______________________________________________ Veritas-bu maillist - [email protected] http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
