Greetings, I just zoned a LTO3 library into an old master server (5.1, I told you it was old). It sees everything but when I do the barcode scan of the tapes it is not doing the same thing for each type of label. I took a line in the vm.conf file and copied it from one of my other libraries and changed the robot number. When I scan the new library, the tapes that have a label like LT3001L3 get a media ID of LT3001 while the tapes with labels of ARF301L3 end up with a media ID of F301L3. I've stopped and restarted the media management database and I get the expected behavior from the LT tapes but not the AR tapes. Here is a copy of the vm.conf file.
DEVICE_HOST = coda SCRATCH_POOL = scratch VERBOSE MEDIA_ID_BARCODE_CHARS 21 8 1:2:3:4:5:6 MEDIA_ID_BARCODE_CHARS 20 8 1:2:3:4:5:6 MEDIA_ID_BARCODE_CHARS 30 8 1:2:3:4:5:6 KNOWN = coda KNOWN = hesston The server coda is the master. Robots 20 and 21 both use the ARF labels when I use gen 2 tapes. I haven't set up a new robot and pool in so long I'm guessing I've forgotten a file somewhere. I just can't remember what else I need to change. Thanks, Jeff -- Jeff Cleverley Unix Systems Administrator 4380 Ziegler Road Fort Collins, Colorado 80525 970-288-4611
_______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu