The -1 -1 -1 says that it has lost the info on the drive.
Try it by hand via the gui Go devices Drives Open up a drive that shows -1 -1 -1 for one of your windows servers >From that window highlight the line for the media server that shows the -1's Choose remove Say ok Let it update. Once that is done double click it again and open it up Now choose add Choose your media server It should show you ONLY that tape drive that matches via serial number. Chose it and do the ok's to save and update. -----Original Message----- From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Brandon35 Sent: Thursday, July 08, 2010 4:23 PM To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU Subject: [Veritas-bu] SAN Switch Change caused NBU7 to lose tape drives I tried this on my solaris box, all I get is ********************* ****** SDT_TAPE ***** ********************* and nothing... Is there anyway to get this same information on a windows box? What if i'm getting -1, -1, -1 ?? +---------------------------------------------------------------------- |This was sent by brandon.pawoll....@mda.mil via Backup Central. |Forward SPAM to ab...@backupcentral.com. +---------------------------------------------------------------------- _______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu _______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu