1000 isn't a particularly large number of LUNs, even for 4.1 (although 5.0 will handle such configurations much better and faster). Can you open a support case for this? Regards, Scott
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of ashish madhavan Sent: Monday, October 29, 2007 9:25 AM To: veritas-vx@mailman.eng.auburn.edu; Dmitry Glushenok; Mark Alleyne Subject: Re: [Veritas-vx] VxVM 4.1, vxconfigd issue Thanks for your replies Dmitry and Mark. I had forgotten to run vxinstall. But even after I had it could not start vxconfigd.So I removed all VRTS packages did a reconfig boot and re-installed Veritas using the storage foundation 4.1 "installer" script which does the configuration and installation. Even this failed during configuration stage.... ::: Starting vxconfigd for VxVM on linbgm011 ..................................................................... Failed :::: None of the target systems can be configured because 1) its previous configuration was restored, 2) the vxconfigd daemon is not running properly, or 3) VxVM is already configured. Use the vxdctl(1M) command to configure the default disk group after the installation is completed. Press [Return] to continue: Volume Manager default disk group setup and daemon startup vxconfigd on linbgm011 is not available; installer cannot set the default disk group. As vxconfigd is not enabled on linbgm011, VxVM daemons will not be started. Is vxconfigd failing due to the large number of luns? Thanks, Ashish ________________________________ > Date: Mon, 29 Oct 2007 17:09:08 +0300 > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > CC: veritas-vx@mailman.eng.auburn.edu > Subject: Re: [Veritas-vx] VxVM 4.1, vxconfigd issue > > Hello, > > Have you tried to use vxinstall to do things like creating volboot, removing > install-db, etcetera? > > ashish madhavan wrote: > > > > Hi, > > > > I have a Sun 220R to which I have assigned 1000 luns of 45 Mb (this is > > to simulation a case) from a symmetrix. Host details are - > > > > 1. SunOS 5.10 Generic_118833-36 > > 2. Veritas 4.1 > > 3. HBA = LP10000 > > > > After installing vxvm 4.1 I removed the install-db and issued a > > reconfiguration boot.After the boot VX daemons are not active. I tried > > to manually start it, but gives the below error - > > > > #vxconfigd > > V-5-1-7607 vxvm:vxconfigd: WARNING: File /etc/vx/array.info doesn't exist. > > Generating file /etc/vx/array.info. > > > > VxVM vxconfigd ERROR V-5-1-0 Bus error - core dumped > > linbgm011#vxdctl init > > vxdctl: Configuration daemon is not accessible > > > > linbgm011#ls -l /etc/vx/array.info > > /etc/vx/array.info: No such file or directory > > > > > > The only "vx" processes running are : > > #ps -ef|grep vx > > root 176 1 0 18:21:42 ? 0:00 /sbin/vxesd > > root 493 1 0 18:22:18 ? 0:03 /opt/VRTSob/bin/vxsvc > > -r /opt/VRTSob/config/Registry -e > > > > > > Am I missing something? > > > > Thanks, > > Ashish > > > > > > ------------------------------------------------------------------------ > > Search from any Web page with powerful protection. Get the FREE Windows > > Live Toolbar Today! Try it now! <http://toolbar.live.com/?mkt=en-in> > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Veritas-vx maillist - Veritas-vx@mailman.eng.auburn.edu > > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx > > > -- > Dmitry Glushenok <[EMAIL PROTECTED]> > Jet Infosystems > Tel: +7 (495) 411 76 04 > Fax: +7 (495) 411 76 05 ________________________________ Call friends with PC-to-PC calling -- FREE Try it now! <http://get.live.com/messenger/overview>
_______________________________________________ Veritas-vx maillist - Veritas-vx@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx
