Hi Gurus, How do i use vxdmp on a ufs filesystem?.
For ex: -bash-3.00# vxdisk list c7t500A098186783720d25s2 Device: c7t500A098186783720d25s2 devicetag: c7t500A098186783720d25 type: auto info: format=none flags: nolabel private autoconfig invalid pubpaths: block=/dev/vx/dmp/c7t500A098186783720d25s2 char=/dev/vx/rdmp/c7t500A098186783720d25s2 guid: - site: - Multipathing information: numpaths: 8 c7t500A098186783720d25s2 state=enabled type=primary c8t500A098186783720d25s2 state=enabled type=primary c7t500A098286783720d25s2 state=enabled type=primary c8t500A098286783720d25s2 state=enabled type=primary c7t500A098296783720d25s2 state=enabled type=secondary c7t500A098196783720d25s2 state=enabled type=secondary c8t500A098296783720d25s2 state=enabled type=secondary c8t500A098196783720d25s2 state=enabled type=secondary If i mount the disk device as, say, /dev/dsk/c8t500A098196783720d25s2, then it will not survive a path failure since its thro that particular target port. Do i need to encapsulate the device? Or am i missing something elementary?. I am trying to run some tests on ufs with vxdmp and without vxvm.Is this feasible at all?. thanks a bunch folks!! Gak
_______________________________________________ Veritas-vx maillist - [email protected] http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx
