Chuck,
You beat me to it. I finally had a chance to look at the package from
the product I used - that is the one. It worked well on several
projects that have moderate stresses on them.
Bruce
On 5/9/19 4:16 PM, Chuck Alexander wrote:
5 minute epoxy needed
Bruce: I forgot to put the link to the Locktite plastic bonder I asked
you if it rings a bell. Try this. Thanks, Chuck
http://www.loctiteproducts.com/p/epxy_plstc_s/overview/Loctite-Epoxy-Plastic-Bonder.htm
*From:*Chuck Alexander <[email protected]>
*Sent:* Tuesday, May 7, 2019 11:27 PM
*To:* '[email protected]' <[email protected]>
*Subject:* RE: [VFB] 5 minute epoxy needed
Bruce: Thanks a lot. Just let me know the name of it if you happen to
remember. I think JB Weld brand has a pretty new line called JB
Plastiweld. I’ll go to Lowes and search it. Thanks, Chuck
*From:*[email protected] <mailto:[email protected]>
<[email protected] <mailto:[email protected]>> *On
Behalf Of *Bruce Whittle
*Sent:* Tuesday, May 7, 2019 9:05 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [VFB] 5 minute epoxy needed
Chuck,
There is an epoxy that is made FOR plastics. I used it on a cattle
repeater syringe piece that broke. This piece takes quite a bit of
stress and it is still holding after at least 6 months of pretty heavy
use. I cannot remember the exact brand but I found it at Lowes.
Bruce
On 5/7/19 8:57 PM, Chuck Alexander wrote:
Folks: My transducer for my fish finder broke in two and although
CA super glue works on holding it together, if it gets bumped in
the slightest it re-breaks. So (unless somebody has something else
in mind like some type of Gorilla glue etc???) I’m thinking some
type of 5 minute, two part epoxy would work, but I don’t know a
brand/type that would work best. It’s made of a hard plastic I’m
thinking a hard polyethylene maybe??? Is what the transducer is
made of.
What I’m going to do differently this time though is to mount the
transduce up front on the foot-controlled trolling moto shaft so
it don’t get bumped each time I launch the boat. I tried mounting
it higher by a cpl inches, but when z do that, the sonar against
the back of the boat gets interfered with and bounces part of thee
echo off the back of the boat. Thanks for ANY help. Luckily, where
it broke does not interfere with the operation of the
transducer/fish finder. I tried to find just a transducer and wire
on ebay, Amazon etc, but to no avail. Ppl on there have the same
fish finder as I have with no transducer LOL. I guess it’s a
common breakage point. Chuck
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
--
--
You received this message because you are subscribed to the "VFB
Mail" group.
To post to this group, send email to [email protected]
<mailto:[email protected]>
To unsubscribe from this group, send email to
[email protected]
<mailto:[email protected]>
For more options, visit this group at
http://groups.google.com/group/vfb-mail?hl=en
VFB Mail is sponsored by Line's End Inc at http://www.linesend.com
---
You received this message because you are subscribed to the Google
Groups "VFB Mail" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/vfb-mail/001201d50541%245cf91ae0%2416eb50a0%24%40centurylink.net
<https://groups.google.com/d/msgid/vfb-mail/001201d50541%245cf91ae0%2416eb50a0%24%40centurylink.net?utm_medium=email&utm_source=footer>.
For more options, visit https://groups.google.com/d/optout.
--
Bruce P. Whittle, DVM
210 E. Hwy 6
Trenton, MO 64683
(660)-359-9908 (clinic)
"Nothing worthwhile was ever accomplished without the will to
start, the enthusiasm to continue and, regardless of temporary
obstacles, the persistence to complete" Waite Phillips
--
--
You received this message because you are subscribed to the "VFB Mail"
group.
To post to this group, send email to [email protected]
<mailto:[email protected]>
To unsubscribe from this group, send email to
[email protected]
<mailto:[email protected]>
For more options, visit this group at
http://groups.google.com/group/vfb-mail?hl=en
VFB Mail is sponsored by Line's End Inc at http://www.linesend.com
---
You received this message because you are subscribed to the Google
Groups "VFB Mail" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/vfb-mail/b05e749a-6905-8009-644f-3a6c6dd72308%40gmail.com
<https://groups.google.com/d/msgid/vfb-mail/b05e749a-6905-8009-644f-3a6c6dd72308%40gmail.com?utm_medium=email&utm_source=footer>.
For more options, visit https://groups.google.com/d/optout.
--
--
You received this message because you are subscribed to the "VFB Mail"
group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/vfb-mail?hl=en
VFB Mail is sponsored by Line's End Inc at http://www.linesend.com
---
You received this message because you are subscribed to the Google
Groups "VFB Mail" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/vfb-mail/006201d506ac%24853d0d10%248fb72730%24%40centurylink.net
<https://groups.google.com/d/msgid/vfb-mail/006201d506ac%24853d0d10%248fb72730%24%40centurylink.net?utm_medium=email&utm_source=footer>.
For more options, visit https://groups.google.com/d/optout.
--
Bruce P. Whittle, DVM
210 E. Hwy 6
Trenton, MO 64683
(660)-359-9908 (clinic)
"Nothing worthwhile was ever accomplished without the will to
start, the enthusiasm to continue and, regardless of temporary
obstacles, the persistence to complete" Waite Phillips
--
--
You received this message because you are subscribed to the "VFB Mail" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/vfb-mail?hl=en
VFB Mail is sponsored by Line's End Inc at http://www.linesend.com
---
You received this message because you are subscribed to the Google Groups "VFB Mail" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/vfb-mail/5e150759-b6dc-5a28-4f10-e270c406a718%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
