Re: [VFB] Wine corks

[SDavis8862]

Yep, James, there are ball type bits. if you go looking at new bits, check out the cut-off discs and the cylinder shaped, barrel sander bits that come with different grit sandpaper sleeves. I use these two more than any other.The lower the number  on the sandpaper (60,80,etc.), the more material it will remove but it leaves a rough finish. The higher numbers (120,180,etc.) the finer the finish. I'll generally shape the popper with the rough paper, then switch to the fine paper to smooth before painting.
Good luck
Steve