If the tooth pick is the wrong type of wood it will tend to cause the epoxy to yellow. When I mix flex coat I use a plastic or steel piece for mixing to keep from causing problems, so I've extended it to my fly tying. Dan ----- Original Message ----- From: "Byard Miller" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 03, 2002 11:15 AM Subject: Re: [VFB] Epoxy question
> I use devon, 5 and 30 min epoxy. I've had very good results. Be sure > the epoxy is at room temp around 70 degrees. Make sure to measure the > two part carefully. Don't use a toothpick to mix with, I use a needle > and a small piece of aluminum foil to mix on. Dan > > > > Why not mix with a toothpick Dan? That's what I have always > used...with no problem. > > keep tyin'...byard >
