Mike You can make one real easy if you want. I have made several from 1/8" brass and aluminum welding rod. For the base, wrap the rod on a length of 5/16 rod forming a spring like wrap. About four wraps will be enough. This will slide snug on the 3/8 vise stem. Bend the rod up 90* to the wrap. At about 6 or 8" make another 90* bend so the rod will be above and over the top of the vise. Cut off the end of the rod so that it is just above the end of the vise jaws. Drill a tiny hole through the welding rod to accept the end of a small spring. Install the spring and attach a hackle pliers to the spring loop. That is it, I may still have one around that I can take a shot of. You can make a bobbin holder the same way. Tony ( Pooped out) [EMAIL PROTECTED]
Mike Bliss wrote: > I would like to get a gallows tool. Can anyone tell me whre to get one? > Will it work off any vise? I have a Regal. > > Mike
