OK, all that worked, and still no check mark in the list. hundreds of symbols. no check mark!
----- Original Message ----- From: "jerry" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 27, 2004 3:43 PM Subject: Re: [VFB] character codes > You're probably running with a Windows setup for minimum (laptop) or custom > install and the character map was not installed. You'll need the Windows > master disk > > Start > Control Panel > Add/Remove Programs > Windows Setup > System Tools > Details > then select character map and follow the instructions to install > > Jerry > WY > > > At 12:34 PM 7/27/04 -0700, you wrote: > >Won't work on mine. Shows 'file not there'. > > > >DonO > > > >----- Original Message ----- > >From: "Dave Campbell" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Tuesday, July 27, 2004 10:44 AM > >Subject: [VFB] character codes > > > > > >Don, and everyone.. > > > >Hope this hasn't been gone over before... if it has, please excuse the > >repetition... > > > >If you push the Start menu and go to "Run", then type in "charmap" (without > >the quotes), it will bring up a character map program. > > > >Up at the top you pick the font, and you can see the different characters in > >the window. If you click on a character, it will show it larger for you and > >show you the code to type it on the bottom right of the whole window. > > > >You can also push the "select" button and it copies that character into the > >"characters to copy" window, and then the "copy" button will copy those > >characters so you can paste them into your application... > > > >-Dave > >
