Gary, I agree. Tony --- "Garry V. Wiles" <[EMAIL PROTECTED]> wrote:
> Toy, > > I thought I was tying right handed, but wasn't > sure. It doesn't really matter to me as I > haven't had any problem with things like my whip > finishes coming lose or things like that -- AND > my flys catch fish! I cannot complain about that! > > > GaRRy > > > > At 11:06 PM 10/2/2006, you wrote: > >Gary, > > You are tying what I would say "right handed". > This > >is normally the way a right handed person would > tie. > >It makes no difference, tie the best way you can. > >Just enjoy what you do. > >Tony > > > >--- "Garry V. Wiles" <[EMAIL PROTECTED]> wrote: > > > > > Tony, > > > > > > I'm left handed and I tie the way I was > > > taught. As I sit and face the vice, the bend is > > > on the left and the eye on the right. I wrap > > > with my right hand and hold material with my > left > > > hand. I'm just more dexterous that way. I > > > started with a Cortland tying kit and have > > > upgraded my vise to a Dan-Vise. I still use > most > > > of the tools that came with the original kit and > > > have more bobbins that I care to admit, though > my > > > favorite bobbins are the Rite bobbins. > > > > > > > > > Garry > > > > > > > > > At 09:31 AM 10/1/2006, you wrote: > > > >Nick has some good pointers, I well just add to > > > this. > > > >If you are tying right handed wrapping away > from > > > you, > > > >to remove the twist, grasp the bobbin by the > neck > > > and > > > >spin it "TOWARDS" the hook eye. This will > untwist > > > the > > > >thread. If you are tying left handed towards > you, > > > (I > > > >have seen this done)thread will untwist itself. > > > >Left handed tyers, If I am wrong, correct me. > Most > > > >left handed tyers I have seen tie like right > > > handers. > > > >Now that should be a thread, left and right > hand > > > >tyers. > > > >Tony > > > > > > > >--- Niclas Runarsson > > > <[EMAIL PROTECTED]> > > > >wrote: > > > > > > > > > Chuck, > > > > > > > > > > Check out > > > > > > > > > http://www.gudebrod.com/fishing2005/BorgerColor.htm > > > > > for an online > > > > > Borger Color System chart. > > > > > > > > > > Further info on your threads: > > > > > Your black 8/0 is a 67 Denier thread. Quite > thin > > > > > compared to most other > > > > > manufacturers 8/0's. The fact that you have > no > > > > > problem with tying it off > > > > > doesn't surprise me. > > > > > Your 6/0 is a 125 Denier thread which is > quite a > > > > > difference to the 8/0. Try > > > > > to untwist it before whip-finishing and see > if > > > that > > > > > helps. It did for me. > > > > > > > > > > /Nick > > > > > > > > > > > > > > > > > > > > -----Ursprungligt meddelande----- > > > > > Från: [EMAIL PROTECTED] > > > > > [mailto:[EMAIL PROTECTED] För > > > > > Anthony Spezio > > > > > Skickat: den 1 oktober 2006 14:22 > > > > > Till: [email protected] > > > > > Ämne: Re: [VFB] Guderbrod Thread Question > > > > > > > > > > > > > > > The BCS before the # is BOGER COLOR SYSTEM. > A # > > > is > > > > > assigned to a particular color. The 20's are > > > Green > > > > > shades,, 40's Yellow shades, 70's Red shades > > > > > 90's Brown shades and the 100's Dark Colors, > > > Gray's > > > > > Blues and Black. > > > > > Gary Borgers fly pattern recipies are > written up > > > > > using > > > > > his coloring system numbers as are some > other > > > > > recipes. > > > > > There is a little booklet with the color > charts > > > on > > > > > them. You can get one from a flyshop that > > > carries > > > > > Gudebrod thread, they are also available on > > > line. > > > > > "Borger Color System Guide and Data Record > > > Booklet" > > > > > Just for info. > > > > > Tony > > > > > > > > > > --- Chuck Alexander > > > > > <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > MeddelandeNick: Thanks for the info.. I > have > > > only > > > > > > three spools and only tried two.. I have a > red > > > > > 6/0 > > > > > > #BCS85 125 denier a black 8/0 BCS > 118(don't > > > know > > > > > > the denier on it, but I suspect about > 80-90, > > > but > > > > > it > > > > > > tied off OK) The one I had trouble with, > as I > > > was > > > > > > trying to tie chili peppers with it is a > 6/0 > > > Fire > > > > > > Orange BCS77 125 denier...It is the one > that > > > gave > > > > > me trouble.. The > > > > > > red, like i said is the same weight, but I > > > haven't > > > > > tried it. I'm > > > > > > starting to think that I just made too > many > > > winds > > > > > on the whip finish.. > > > > > > Chuck > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: Niclas Runarsson > > > > > > To: [email protected] > > > > > > Sent: Saturday, September 30, 2006 1:16 > PM > > > > > > Subject: RE: [VFB] Guderbrod Thread > Question > > > > > > > > > > > > > > > > > > With a 'G' on the rim of the spool, it > > > should be > > > > > > size G polyester thread (250 Denier)... > thick > > > > > > thread. Gel spun thread would make it 'GX > 1' > > > or > > > > > 'GX > > > > > > 2' on the rim (and the thread white). > > > > > > > > > > > > Gudebrod tying threads are quite > generously > > > > > waxed > > > > > > compared to most other threads, but > personally > > > > > I've > > > > > > never found it making them 'slippery'. The > > > > > > difference I would note is that it makes > them > === message truncated === __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
