Hi Samuel, Turning CSM back on did the trick. Thanks for the workaround! These motherboard vendor quirks are the worst.
Ryan On Thu, Jul 28, 2016 at 11:37 AM, Samuel Holland <[email protected]> wrote: > Hello, > > On 07/28/2016 10:39 AM, Ryan A Young wrote: >> >> Forgot to add my motherboard. ASRock H97M. > > > This seems to be a problem with all ASRock boards, at least 9-series. Go > into the firmware setup. First, set fast boot to disabled. then set CSM > to enabled. Then go into the CSM configuration. You can set boot mode to > UEFI only, since I assume you're using UEFI boot on the host already. > The important setting is to change the video option ROM to Legacy. The > other option ROMs can be set to UEFI or disabled (depending on if you > use PXE or chipset RAID). > > Regards, > Samuel -- - Ryan _______________________________________________ vfio-users mailing list [email protected] https://www.redhat.com/mailman/listinfo/vfio-users
