John,
I got an .xawtv file for Australia. I can send it too you if you
want... But mine may differ from yours.. Where abouts in Australia are you?
Jay..
ps. have you loaded the tuner module, (: you might get more than static then
:) ?
----- Original Message -----
From: "John Farrell" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 05, 2001 9:50 PM
Subject: Re: [V4L] modprobe bttv fails
> On Monday 04 June 2001 20:27, John Farrell wrote:
> > > Did you ever plug the card into another slot, or reconfigured your
BIOS
> > > settings, the way that the TV card has it's own IRQ ?
> >
> > I fiddled with the BIOS - I found that telling the BIOS that the
operating
> > system was PNP helped resolve IRQ conflicts under Windows. I made a
> > list, and as far as I can tell there is not a spare IRQ to be had, so I
> > didn't try changing slots yet. I figured if slots was a problem, Linux
> > would say so.
>
> OK, I finally got the kid to bed and had time to switch the slots. In
another
> PCI slot, bttv loads happily (yes, even gzipped), and I get static. Well,
> that's the best I've got so far. Does anyone have a .xawtv file for
Australia?
> Anyone used a Dynalink Magic TView card? Thanks,
>
> John
>
>
>
> _______________________________________________
> Video4linux-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/video4linux-list
>
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
