Hi all of you,
Thanks to your great advice, I finally compiled successfully
BigPhysarea with kernel 2.2.19. I checked and could see the bigphysarea
in /proc. Thank you again a lot.
After successfully installing the kernel, I tried to compile the driver
for the VideoWonder card (which comes with the SAA7110 & Zoran 36120
chip). This is the result of my "lsmod"
****************
Module Size Used by
soundcore 2608 0 (autoclean) (unused)
zoran 23728 0 (unused)
tuner 2224 0 (unused)
saa7110 2592 1
videodev 2688 2 [zoran]
i2c 3520 3 [zoran tuner saa7110]
****************
Then I tried to check if the camera of mine works or not. I am not sure
how to check it, but some website suggested me to run xawtv. I tried to
install and run xawtv in X, but there are some bad errors:
****************
This is xawtv-3.54, running on Linux/i686 (2.2.19)
switching visual (0x25)
Xlib: extension "XVideo" missing on display ":0.0".
can't open /dev/video0: No buffer space available
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No buffer space available
v4l: open /dev/video0: No buffer space available
no video grabber device available
****************
Now I dont know how to go on. Is my Webcam ready to work or not, and if
OK, how can I check configure for it?
Thank you a lot and best wishes,
VTTrang
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
