Hi;
Need a little push. I can get xawtv to come up but I never get any channels. Using all combinations of options for Video Source/Freq I think I need to apply the 0.8.31 driver but can't seem to get the patch to work. I cahnged the pathnames in the patch file to match my dist. --- linux-2.4.5/include/linux/videodev.h Mon Nov 19 11:04:28 2001 +++ linux/include/linux/videodev.h Mon Nov 19 11:41:10 2001 > cd /usr/src > sudo patch < bttv-0.8.31/10_videodev-2.4.15-pre6.diff can't find file to patch at input line 3 Perhaps you should have used the -p or --strip option? The text leading up to this was: -------------------------- |--- linux-2.4.5/include/linux/videodev.h Mon Nov 19 11:04:28 2001 |+++ linux/include/linux/videodev.h Mon Nov 19 11:41:10 2001 -------------------------- File to patch: ctl+d > ls linux-2.4.5/include/linux/videodev.h linux-2.4.5/include/linux/videodev.h ============================================================================ Slackware 8.0 kernel build: 2.4.5 #6 Fri Jun 22 01:38:20 PDT 2001 gcc version 2.95.3 20010315 Cox Cable Virginia, USA > lspci 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:07.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01) 00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] 00:0b.0 SCSI storage controller: BusLogic BT-946C (BA80C30) [MultiMaster 10] 00:11.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W [Millennium] (rev 01) 00:13.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11) 00:13.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11) > dmesg i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.57 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 00:13.0, irq: 9, latency: 66, memory: 0xfff7e000 bttv0: subsystem: 0070:13eb => Hauppauge WinTV => card=10 bttv0: model: BT878(Hauppauge new (bt878)) [autodetected] bttv0: enabling 430FX/VP3 compatibilty bttv0: Hauppauge msp34xx: reset line init i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: Hauppauge eeprom: model=44801, tuner=Temic 4036FY5 (8), radio=no bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0x61 bttv0: i2c attach [Temic NTSC (4036 FY5)] i2c-core.o: client [Temic NTSC (4036 FY5)] registered to adapter [bt848 #0](pos. 0). bttv0: PLL: 28636363 => 35468950 ... ok tuner: TV freq out of range tuner: TV freq out of range bttv0: PLL: switching off bttv0: PLL: 28636363 => 35468950 ... ok bttv0: PLL: switching off bttv0: PLL: 28636363 => 35468950 ... ok bttv0: PLL: switching off bttv0: PLL: 28636363 => 35468950 ... ok tuner: TV freq out of range tuner: TV freq out of range bttv0: PLL: switching off bttv0: PLL: 28636363 => 35468950 ... ok bttv0: PLL: switching off bttv0: PLL: 28636363 => 35468950 ... ok bttv0: PLL: switching off _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
