Quoting YH <[EMAIL PROTECTED]>: > I am running xawtv for a USB quickcam, the v4l-conf had the following message > (error??):
Not an error. > $ ./v4l-conf > v4l-conf: using X11 display :0 > dga: version 2.0 > mode: 1400x1050, depth=24, bpp=32, bpl=5632, base=0xe8000000 > /dev/video0 [v4l2]: ioctl VIDIOC_QUERYCAP: Invalid argument > /dev/video0 [v4l]: no overlay support USB cameras usually are not capable of overlay. You don't need v4l-conf and you want to run "xawtv -remote" to suppress overlay warnings. > Running xawtv, it displayed a very blur picture and the following messages: > > $ ./xawtv -v > This is xawtv-/home/yudehu/dev/XawTV/3.64, running on Linux/i686 (2.4.2-2) > /dev/video0 [v4l]: no overlay support > v4l-conf had some trouble, trying to continue anyway > station "-v" not found > ioctl: VIDIOCMCAPTURE(0,fmt=5,size=176x144): Invalid argument xawtv was probing for the supported format? > v4l: timeout (got SIGALRM), hardware/driver problems? > ioctl: VIDIOCSYNC(0): Interrupted system call > v4l: timeout (got SIGALRM), hardware/driver problems? > ioctl: VIDIOCSYNC(1): Interrupted system call The driver failed to deliver a frame in a reasonable time. I suggest you inspect /var/log/messages and maybe contact the author of the driver directly. Switch from usb-uhci to uhci, or the other way around if you have UHCI host controller. > Can I run the xawtv without capture card (hardware overlay)? Yes. Dmitri -- Predeterminism was doomed from the start.
msg01684/pgp00000.pgp
Description: PGP signature
