In playing with the new Falcon quad capture card, I found that I was getting some hangs with 7x capture with vic with the 0.6.4h drivers. So I installed RedHat 7.2, grabbed 0.7.87, changed the max # of cards to 8, and installed.
All 7 come up, but I get some weird jitter & 16ish line sof green at the top of the images. After a while the captures hang, and I found some errors on the console. Below is the output of dmesg with the startup messages and SCERR messages at the end. Does this ring any bells, or am I just stressing things more than usual :-). thanks, --bob Linux video capture interface: v1.00 i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.87 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 02:04.0, irq: 15, latency: 64, memory: 0xf53fe000 bttv0: using: BT878( *** UNKNOWN/GENERIC **) [card=0,autodetected] bttv0: enabling ETBF (430FX/VP3 compatibilty) i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found i2c-core.o: driver i2c TV tuner driver registered. tuner: probing bt848 #0 i2c adapter [id=0x10005] bttv: Bt8xx card found (1). bttv1: Bt878 (rev 17) at 02:05.0, irq: 10, latency: 64, memory: 0xf53fc000 bttv1: using: BT878( *** UNKNOWN/GENERIC **) [card=0,autodetected] bttv1: enabling ETBF (430FX/VP3 compatibilty) tuner: probing bt848 #1 i2c adapter [id=0x10005] i2c-core.o: adapter bt848 #1 registered as adapter 1. bttv1: i2c: checking for MSP34xx @ 0x80... not found bttv1: i2c: checking for TDA9875 @ 0xb0... not found bttv1: i2c: checking for TDA7432 @ 0x8a... not found bttv: Bt8xx card found (2). bttv2: Bt878 (rev 17) at 02:06.0, irq: 9, latency: 64, memory: 0xf53fa000 bttv2: using: BT878( *** UNKNOWN/GENERIC **) [card=0,autodetected] bttv2: enabling ETBF (430FX/VP3 compatibilty) tuner: probing bt848 #2 i2c adapter [id=0x10005] i2c-core.o: adapter bt848 #2 registered as adapter 2. bttv2: i2c: checking for MSP34xx @ 0x80... not found bttv2: i2c: checking for TDA9875 @ 0xb0... not found bttv2: i2c: checking for TDA7432 @ 0x8a... not found bttv: Bt8xx card found (3). bttv3: Bt878 (rev 17) at 02:07.0, irq: 11, latency: 64, memory: 0xf53f8000 bttv3: using: BT878( *** UNKNOWN/GENERIC **) [card=0,autodetected] bttv3: enabling ETBF (430FX/VP3 compatibilty) tuner: probing bt848 #3 i2c adapter [id=0x10005] i2c-core.o: adapter bt848 #3 registered as adapter 3. bttv3: i2c: checking for MSP34xx @ 0x80... not found bttv3: i2c: checking for TDA9875 @ 0xb0... not found bttv3: i2c: checking for TDA7432 @ 0x8a... not found bttv: Bt8xx card found (4). bttv4: Bt878 (rev 2) at 00:0f.0, irq: 9, latency: 64, memory: 0xfd4fe000 bttv4: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv4: using: BT878(Hauppauge (bt878)) [card=10,autodetected] bttv4: enabling ETBF (430FX/VP3 compatibilty) bttv4: Hauppauge/Voodoo msp34xx: reset line init [5] tuner: probing bt848 #4 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 bttv4: i2c attach [client=(unset),ok] i2c-core.o: client [(unset)] registered to adapter [bt848 #4](pos. 0). i2c-core.o: adapter bt848 #4 registered as adapter 4. bttv4: Hauppauge eeprom: model=61201, tuner=Temic 4036FY5 (8), radio=no bttv4: i2c: checking for MSP34xx @ 0x80... not found bttv4: i2c: checking for TDA9875 @ 0xb0... not found bttv4: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. bttv: Bt8xx card found (5). bttv5: Bt878 (rev 2) at 00:10.0, irq: 11, latency: 64, memory: 0xfd4fc000 bttv5: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv5: using: BT878(Hauppauge (bt878)) [card=10,autodetected] bttv5: enabling ETBF (430FX/VP3 compatibilty) bttv5: Hauppauge/Voodoo msp34xx: reset line init [5] tuner: probing bt848 #5 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 bttv5: i2c attach [client=(unset),ok] i2c-core.o: client [(unset)] registered to adapter [bt848 #5](pos. 0). i2c-core.o: adapter bt848 #5 registered as adapter 5. bttv5: Hauppauge eeprom: model=61201, tuner=Temic 4036FY5 (8), radio=no bttv5: i2c: checking for MSP34xx @ 0x80... not found bttv5: i2c: checking for TDA9875 @ 0xb0... not found bttv5: i2c: checking for TDA7432 @ 0x8a... not found bttv: Bt8xx card found (6). bttv6: Bt878 (rev 2) at 00:12.0, irq: 15, latency: 64, memory: 0xfd4fa000 bttv6: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv6: using: BT878(Hauppauge (bt878)) [card=10,autodetected] bttv6: enabling ETBF (430FX/VP3 compatibilty) bttv6: Hauppauge/Voodoo msp34xx: reset line init [5] tuner: probing bt848 #6 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 bttv6: i2c attach [client=(unset),ok] i2c-core.o: client [(unset)] registered to adapter [bt848 #6](pos. 0). i2c-core.o: adapter bt848 #6 registered as adapter 6. bttv6: Hauppauge eeprom: model=61201, tuner=Temic 4036FY5 (8), radio=no bttv6: i2c: checking for MSP34xx @ 0x80... not found bttv6: i2c: checking for TDA9875 @ 0xb0... not found bttv6: i2c: checking for TDA7432 @ 0x8a... not found bttv4: PLL: 28636363 => 35468950 ... ok bttv5: PLL: 28636363 => 35468950 ... ok bttv6: PLL: 28636363 => 35468950 ... ok bttv3: irq: SCERR risc_count=0d21f010 bttv3: irq: SCERR risc_count=0d21f02c bttv6: PLL: switching off agpgart: AGP mode is 1x bttv4: PLL: switching off bttv5: PLL: switching off bttv1: irq: SCERR risc_count=0e925010 bttv1: irq: SCERR risc_count=0e92502c bttv0: irq: SCERR risc_count=0b78c808 bttv0: irq: SCERR risc_count=0b78c82c bttv2: irq: SCERR risc_count=0aacc010 bttv2: irq: SCERR risc_count=0aacc02c bttv3: irq: SCERR risc_count=0d21f008 bttv3: irq: SCERR risc_count=0d21f02c _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
