> Fauster Ewald - Uni wrote: > > Dear Sirs, > > I'm trying to run a Matrox Meteor II / Multichannel framegrabber under > RedHat Linux 7.1 (kernel 2.4.2) using Video4Linux2. As described at > http://www.thedirks.org/v4l2/, I tried to configure Video4Linux as a > kernel module before installing 'videodevX', but running 'make module' > after configuring and building the kernel lead to a 'parsing error' > with the file 'videodev.o'.
no, not the .o, the .c or maybe .h. look closely and the line number should also be reported. some symbol on the indicated line is likely undefined. also, did you look at the build instructions where it has 2 different ways to build the src? my recollectionis that prior to some kernel level, you did it one way, and after that kernel rev, a different way. check the docs on thedirks.org, they have it spelled out. > > Do you have an explanation for this problem, or can you help me > otherwise to get the grabber running? might i ask how expensive this card was? i need a target for my own forays into v4l2 and need a suggestion of a good framegrabber to start with. any recommendations? i dont mind if its not already supported as i want to get my software hands dirty. :D thanks, jackc... > > Yours sincerely, > > Ewald Fauster > ---------------------- > University of Leoben > Institute for Automation > Peter-Tunner-Strasse 27 > 8700 Leoben > AUSTRIA > > Tel.: ++43 3842 402 9037 > E-Mail: [EMAIL PROTECTED] -- ------------------------------------------------------------------------------- Jack Craig ImageIntegration 831-684-1375 [EMAIL PROTECTED] _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
