Note that the MSP3400 module seems to load even if there's no MSP34xx on your card at all, so this is inconclusive.
Do you have a Rave (39) or a PCTV Studio Pro (52)? (it's autodetecting 39, but you're overriding with 52) What's the miro: id=18 line? Are your modules.conf identical? mikepolniak wrote: > My Pinnacle PCTV card using xawtv works fine in my two pc's with a SiS650 and > a SiS745 chipset. But when i put the card in my third pc with a SiS646(645dx) > chipset > the video works but sound fails because bttv doesn't find MSP3400: > > bttv: driver version 0.7.91 loaded > bttv: using 2 buffers with 2080k (4160k total) for capture > bttv: Host bridge is PCI device 1039:0646 (Silicon Integrated Systems [SiS]) > <------- > bttv: Bt8xx card found (0). > bttv0: Bt878 (rev 17) at 00:0c.0, irq: 11, latency: 32, memory: 0xfc000000 > bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 > bttv0: using: BT878(Pinnacle PCTV Studio Pr) [card=52,insmod option] > bttv0: i2c: checking for MSP34xx @ 0x80... not found > bttv0: miro: id=18 tuner=2 radio=fmtuner stereo=no > bttv0: i2c: checking for MSP34xx @ 0x80... not found > <------------------------------ > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > bttv0: i2c attach [client=Philips NTSC,ok] > bttv0: registered device video0 > bttv0: registered device vbi0 > bttv0: registered device radio0 > > I am using the same kernel on all three pc's and even tried 2.4.19-rc1-ac1 but > still get the same MSP34XX not found. I can modprobe msp3400 ok, but that > doesn't help. On the two pc's where sound works i get MSP34xx found and > registered and msp3410 daemon started: > > Jul 13 20:03:09 gent kernel: bttv0: i2c: checking for MSP34xx @ 0x80... > found > Jul 13 20:03:09 gent kernel: i2c-core.o: driver i2c msp3400 driver > registered. > Jul 13 20:03:09 gent kernel: msp34xx: init: chip=MSP3451G-A2, has NICAM > support > Jul 13 20:03:09 gent kernel: msp3410: daemon started > Jul 13 20:03:09 gent kernel: bttv0: i2c attach [client=MSP3451G-A2,ok] > Jul 13 20:03:09 gent kernel: i2c-core.o: client [MSP3451G-A2] registered to > > Any clues to this problem greatly appreciated. > > > > _______________________________________________ > Video4linux-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/video4linux-list -- Bill Eldridge Radio Free Asia [EMAIL PROTECTED] _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
