Tuners are in the "Tuners" file, cards are in "Cards" and "CARDLIST".
Your card=27 is for a MAXI TV Video PCI2, not an AVerMedia StudioPro. (card=41 or 6 or 13?) You were right on the tuner, it is a Philips NTSC, tuner=2 The MAKEDEV file will create your devices for you, but perhaps not /dev/mixerX crw------- 1 root root 14, 0 Aug 30 2001 /dev/mixer crw------- 1 root root 14, 0 Apr 5 2001 /dev/mixer0 crw------- 1 root root 14, 16 Aug 30 2001 /dev/mixer1 crw------- 1 root root 14, 32 Apr 5 2001 /dev/mixer2 crw------- 1 root root 14, 48 Apr 5 2001 /dev/mixer3 Andy Fundinger wrote: > Ok, I tried tuner=27, card=27 tuner=2, and card=27 tuner=27. I also > pulled the sticker off and had a look, I found the following: > > Philips > 33139 134110C > FM1236/PH hm > SV22 0205 > > If I had to pick one I'd guess that the tuner is and FM 1236/PH but I > can't find any of these magic numbers in CARDLIST or Cards. In any event > tuner=2 makes the video work fine, tuner=27 seems to leave out a few > stations, whatever that may indicate. Any suggestions? Any how does the > audio look when its working? What is the TVaudio/audio mixer device in > /dev? Could somebody post a commented ls -l showing these devices? > > Andy Fundinger > > On Sun, 28 Jul 2002, Bill Eldridge wrote: > > >>My guess is you really need tuner=27 for this card. >>All the detection is pretty well dependent on getting >>the right card & tuner, and while sometimes it can >>autodetect, quite often it autodetects a wrong value. >> >>Look under the label on your tuner for actual numbers >>and correlate them with the list in Tuners and see what >>you really have. >> >>Andy Fundinger wrote: >> >>>Ok, I'm kind of confused about how the audio setup is supposed to work. I >>>seem to have a module called tvaudio and one called tvmixer but I have no >>>corresponding devices. How are the tv programs supposed to have access to >>>these drivers? According to Cardlist the AVerTV Studio has a Tda9840 >>>sound chip supported by tvaudio. I can see tvaudio module loading but no >>>indication of it finding anything. tvmixer says the Phillips NTSC has no >>>mixer. I can get video through xawtv with modprobe bttv tuner=2 radio=1, >>>but no sound even bypassing the sound card. I'm using bttv 0.7.94 against >>>a customized 2.4.18 kernel but I have not patched the kernel with the >>>bttv code, rather I've been compiling it separately. >>> >>>Any suggestions? Logs that would help diagnose this problem? Is this a >>>card problem or did I miss a manual to read? I have until Friday to >>>return the card if this can't be made to work. >>> >>>Andy Fundinger >>> >>>_______________________________________________ >>>Video4linux-list mailing list >>>[EMAIL PROTECTED] >>>https://listman.redhat.com/mailman/listinfo/video4linux-list >> >> > > > > > > > _______________________________________________ > Video4linux-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/video4linux-list -- Bill Eldridge Radio Free Asia [EMAIL PROTECTED] _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
