Ronald Bultje wrote: > Does the file /dev/video exist? (ls /dev/video). > > If it says "no such device", it might not have found the card. See your > 'dmesg' output. Probably, the zr36067 module was loaded before the > saa7111/saa7185 module. To correct this, remove the zr36067 module > (/sbin/rmmod zr36067) and load the modules in the right order > (/sbin/insmod saa7111, /sbin/insmod saa7185 and /sbin/insmod zr36067). > If xawtv now works, you've found your solution. Adding "pre-install > zr36067 ( /sbin/insmod saa7110; /sbin/insmod saa7185 )" and "post-remove > ( /sbin/rmmod saa7110; /sbin/rmmod saa7185 )" to your /etc/modules.conf > should correct the problem on subsequent boots. >
THANKS! I also had to add videodev and i2c-old before and of the saa stuff. Also your typo on the automation section had me going in circles for a while. (saa7111 ->saa7110) But XawTV works wounderfuly now. It gets overlay where Wondows wont! :) Lance F. Squire _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
