Hi, I have a problem using my Pinnacle PCTV Pro card under Linux. I can use xawtv to view TV OK, but I cannot change channel. I have a dual boot machine and the channel remains fixed on the last channel the card was set to under Windows. Under Windows channels can be changed fine. Any ideas appreciated. Relevant details are:
O/S: RedHat 7.3 - Kernel 2.4.18-10 Hardware: Pinnable PCTV Pro (auto-identified by bttv as card=39) Locale: Netherlands (PAL B/G via cable antenna) Kernel messages from loading the driver modules (tuner, bttv) are: kernel: i2c-core.o: driver i2c TV tuner driver registered. kernel: bttv: driver version 0.7.91 loaded kernel: bttv: using 2 buffers with 2080k (4160k total) for capture kernel: bttv: Host bridge is VIA Technologies, Inc. VT8367 [KT266] kernel: bttv: Bt8xx card found (0). kernel: bttv0: Bt878 (rev 17) at 00:0c.0, irq: 11, latency: 32, memory: 0xdddff000 kernel: bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 kernel: bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected] kernel: msp34xx: init: chip=MSP3450G-B8, has NICAM support kernel: msp3410: daemon started kernel: bttv0: i2c attach [client=MSP3450G-B8,ok] kernel: i2c-core.o: client [MSP3450G-B8] registered to adapter [bt848 #0](pos. 0). kernel: tuner: probing bt848 #0 i2c adapter [id=0x10005] kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0. kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found kernel: bttv0: miro: id=30 tuner=4 radio=matchbox stereo=yes kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found kernel: bttv0: registered device video0 kernel: bttv0: registered device vbi0 kernel: bttv0: registered device radio0 _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
