Hi,
I have a FlyVideo 3000 FM PAL-B (ordered from Australia)
the FM version uses an HEF4052BT?? muxer to select audio, like the FV2K
I'm not sure about the TV, radio entries, but the Line In is working for me.
you should create a new entry for FlyVideo3000FM, start from the
FlyVideo3000 and add
gpiomask: 0x6000
inputs: {{
name: name_tv,
vmux: 1,
amux: TV,
tv: 1,
},{
name: name_comp1,
vmux: 0,
amux: LINE2,
gpio: 0x4000,
},{
name: name_comp2,
vmux: 3,
amux: LINE2,
gpio: 0x4000,
},{
name: name_svideo,
vmux: 8,
amux: LINE2,
gpio: 0x4000,
}},
radio: {
name: name_radio,
amux: LINE2,
gpio: 0x0000,
},
mute: {
name: name_mute,
amux: LINE1,
}
Also, you might need to change the muting code in saa7134-tvaudio.c, in
function "saa7134_tvaudio_do_mute_input" you have the line
if (!card_has_audio(dev) && card(dev).mute.name) {
that only uses the mute entry if the card is not saa7134
Hope that helps
Guy Yur
----- Original Message -----
From: "Ackermann Andreas" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 02, 2002 2:06 PM
Subject: [V4L] Again: FlyVideo 3000 and audio
> Hi,
>
> I'm sorry to start this subject again, but searching the list archives I
> have not found
> any final solution for this.
>
> I bought mine in Germany in april, at Norma, a local food and non-food
> distributor.
>
> It has FM radio and it seems to use the PHILIPS-PAL-tuner, opposed to the
> definitions
> in saa7134-cards.c where a TECRAM or the like is used.
>
> Thus, using the card=2 (==FlyVideo3000) insmod option for this card,
doesn't
> work at all:
> video + audio just static.
>
> Using card=3 (==Flyvideo2000) works fine, but there's no audio :-(
>
> I played around, modifying (erh... messing) the saa7134-cards.c and
somehow
> got it to do the
> right thing: Muting worked. I did this by taking the FlyVideo3000
> definitions and changing the
> tuner type and audio input definition.
>
> However, after switching power off and restarting, audio again didn't work
> :-(. Best I could get
> was audio as soon as driver was inserted until it was unloaded with muting
> not working ...
> (If I remember right this was with gpio flags set to all zeros).
>
> So, is there anybody who has experimented with those gpio flags for this
> particular board?
> Am I the only one having this _specific_ type of Flyvideo 3000 running
under
> Linux?
>
> Is there a way to find out which gpio values are used by the windows
driver?
> Where can on
> get information on this?
>
> Thanks very much!
>
> -Andreas (Acki)
>
>
>
>
> _______________________________________________
> Video4linux-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/video4linux-list
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
