On Wednesday 04 September 2002 01:37 pm, Barry wrote: > I'm still working on the problem of the Pinnacle PCTVpro card not > tuning under Linux and am looking for some more feedback. Basically, > I think the problem is caused (at least partially) by the tuner.o > module losing contact with the MT2032 tuner chip on the card. This > occurs after any contact on the I2C bus with the TDA9886 chip also > located on the card.
> If anyone has any suggestions on how contact can be re-established > with the MT2032 I be very interested (FYI - even a 'shutdown -r' > doesn't work, it needs to be a full power reset). Just for all interested, I've verified that this happens also with the plain Pinnacle PCTV with a TDA9885. What seems to happen here is that if I load the tuner module forced to type=33 and then load bttv, I can (sort of) control the MT2032 (it changes channels, but they don't come in right and I don't alway get audio, etc, etc). If I then load the tda9887, it seems to keep working. However, if I then unload everything and load tuner and bttv again, I can no longer get the tuner to respond. The only way I've talked to the TDA is by loading the tda9887.o module -- which looking at what that module does, might not be doing the wrong thing for me anyway, since it seems to be trying to set a PAL mode, but I need NTSC. -- Wesley J. Landaker - [EMAIL PROTECTED] OpenPGP FP: C99E DF40 54F6 B625 FD48 B509 A3DE 8D79 541F F830 _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
