On Saturday 07 September 2002 12:08 pm, Gunther Mayer wrote: > Hi, > this patch makes the PAL variant work perfectly (NTSC and SECAM > should work, but untested). The missing point was, we need to set OP2 > on TDA9886, else MT2032 would be disabled after loading tda9887.o > (thanks to Barry for pinpointing this failure mode).
> With this patch everything will work out-of-the-box (modulo bugs:-) > - MT2032 is detected automatically > - tda9885/6 is detected and module is loaded automatically > - Pal/Secam/Ntsc will automatically follow your selection in xawtv Wow, great work, Gunther! I had started to poke around at the TDA9885 myself, but you've already got it integrated! I tried applying this patch, and indeed, it does fix quite a lot of the problems I was seeing. Now autodetection seems to be working great and contact with the MT2032 no longer drops out. =) Unfortunately, I'm still not getting sound. I'm seeing the same behavior as I did the last time, where only video comes in, but if I use xawtv "fine-tune" to about (9) or (10), sound comes (of course, accompanied by fuzzy video ;) I'm using NTSC here in the US, using us-cable as the tuner setting. Any ideas? Is there anything else I should try? Can I provide more information that would be helpful? -- Wesley J. Landaker - [EMAIL PROTECTED] OpenPGP FP: C99E DF40 54F6 B625 FD48 B509 A3DE 8D79 541F F830 _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
