On Sun, 2002-09-22 at 14:03, Barrie wrote:
> I have the Flyvideo 3000 card working (for TV) successfully on Redhat
> 7.3. I used the archives for this list to assist in getting this far, so
> thanks to all who have contibuted. The biggest problem I found was that
> there wasn't a step by step instuction for getting it going. So here's a
> doco that does just that. If there is a FAQ in the making, maybe it this
> could be added to it if it is found useful and correct.
---snipage---
I've followed Barrie's HOWTO and unfortunately still no go.
To make sure there is no mistake with the wiring or mixer settings for
my sound card I have the audio out of the card going directly to an amp
and speakers.
A couple of interesting points to note:
I can tell when the card is initialised as there is a small pop from the
speakers.
It doesn't seem to matter if the audio out from the card is originally
from the onboard tuner or is being input to be captured.
If no mixer is specified it selects mixer2 by default (in my case
anyway) - however I don't have a /dev/mixer2. Is this what its referring
to? (I have tried mixer1 - which I do have but makes no difference)
Any ideas people?
The kernel log is as follows, Everything is pretty much the same as
Barrie's except the IRQ sharing.
Sep 23 18:21:18 lina kernel: i2c-core.o: i2c core module
Sep 23 18:21:18 lina kernel: Linux video capture interface: v1.00
Sep 23 18:21:18 lina kernel: i2c-core.o: driver i2c TV tuner driver
registered.
Sep 23 18:21:18 lina kernel: i2c-core.o: driver i2c tda9887 driver
registered.
Sep 23 18:21:18 lina kernel: saa7130/34: v4l2 driver version 0.1.9
loaded
Sep 23 18:21:18 lina kernel: PCI: Found IRQ 9 for device 02:0d.0
Sep 23 18:21:18 lina kernel: PCI: Sharing IRQ 9 with 02:03.0
Sep 23 18:21:18 lina kernel: PCI: Sharing IRQ 9 with 02:04.0
Sep 23 18:21:18 lina kernel: PCI: Sharing IRQ 9 with 02:09.0
Sep 23 18:21:18 lina kernel: saa7134[0]: found at 02:0d.0, rev: 1, irq:
9, latency: 16, mmio: 0xe6000000
Sep 23 18:21:18 lina kernel: saa7134[0]: subsystem: 1131:0000, board:
LifeView FlyVIDEO3000 [card=2,insmod option]
Sep 23 18:21:18 lina kernel: tuner: probing saa7134[0] i2c adapter
[id=0x90000]
Sep 23 18:21:18 lina kernel: tuner: chip found @ 0xc2
Sep 23 18:21:18 lina kernel: i2c-core.o: client [Philips PAL_BG (FI1216
and compa] registered to adapter [saa7134[0]](pos. 0).
Sep 23 18:21:18 lina kernel: saa7134[0]/video: DCSDT: no signal
Sep 23 18:21:18 lina kernel: tda9887: probing saa7134[0] i2c adapter
[id=0x90000]
Sep 23 18:21:18 lina kernel: i2c-core.o: adapter saa7134[0] registered
as adapter 0.
Sep 23 18:21:18 lina kernel: saa7134[0]: Huh, no eeprom present
(err=-5)?
Sep 23 18:21:18 lina kernel: saa7134[0]: registered device video0 [v4l2]
Sep 23 18:21:18 lina kernel: saa7134[0]: registered device vbi0
Sep 23 18:21:18 lina kernel: saa7134[0]: registered device radio0
Sep 23 18:21:18 lina kernel: saa7134[0]: registered device dsp1
Sep 23 18:21:18 lina kernel: saa7134[0]: registered device mixer2
Sep 23 18:21:18 lina kernel: saa7134[0]/video: DCSDT: no signal
Sep 23 18:21:18 lina kernel: saa7134[0]/video: DCSDT: found PAL
--
James Budworth
[EMAIL PROTECTED]
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
