I got one of this boards and its working fine but will be very good if the bttv driver 
directly detects it or have it as one 
of the default cards :

-----------------------------------------------------------------------
Pixelview PlayTV Pro
878P+ Rev 8E
with FM and Remote Control

Works as "bttv card=70 radio=1" if I preload module "tuner type=36"

The stamp on the tuner has NTSC selected but I'm on Brazil using PAL-M 
with success.

I think this data can be used to create a new entry in bttv driver to 
support this 
board with correct tunner.

Also for information on the PixelView site, the Driver for this board (Rev 
8E) are the same for 
Rev 8D,4C,8X and 10A

lspci result :
--------------------------------------------------------------------------
---------------------
00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video 
Capture (rev 11)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at d8002000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D
2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture 
(rev 11)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at d8000000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D
2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--------------------------------------------------------------------------
---------------------






_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list

Reply via email to