Gerd Knorr wrote: >> I can't see any tuner-chip at the card, but I have only got the tuner to >> work with tuner=33: "MT2032 universal", although I haven't tried all. I >> actually got this tuner autodetected with some version of bttv, but in >> the newest version, it detects 14:"Temic PAL_BG (4006FH5)", which >> doesn't work at all. >> >> > >??? according to the logs below the card got detected correctly and it >should have worked without the tuner insmod option too. > No. I think it detected it correctly (tuner=33) with the modules from 2.4.19-kernel, but after I upgraded to the -100-version, it detects tuner=14, like the log below here when not specifying a tuner.
> > > >> When I try listening to radio, I beleve I the first time after loading >> the drivers get 1/4 of a second of radio sound, but after that, I hear >> just noise. Changing the frequency only gives a click. >> >> > >Will check next week ... > OK. Thanks. > > > >> I tried the detect-program in bttv-source, but then geth this is syslog: >> "i2c-core.o: I2C adapter 40002: I2C level transfers not supported" >> >> > >There are multiple i2c busses in your system, you have to pick the right >i2c character device ... > OK. Then I got this: ------- marius:/usr/src/bttv-0.7.100/tools# ./detect -d /dev/i2c-2 0x80: msp34xx/tea6300 sound processor (error: Device or resource busy) 0x86: TDA9885/TDA9886/TDA9887 tv and sound demodulator (error: Device or resource busy) 0xa0: eeprom (bt878, Hauppauge-848) (error: Device or resource busy) 0xa2: ??? (error: Device or resource busy) 0xa4: ??? (error: Device or resource busy) 0xa6: ??? (error: Device or resource busy) 0xc0: tuner (error: Device or resource busy) ----- Not anything new there... But I can't get the eeprom to work: marius:/usr/src/bttv-0.7.100/tools# ./eeprom -d /dev/i2c-2 write addr /dev/i2c-2: Remote I/O error > > Gerd > > > BTW, is there any SF-page or CVS for the bttv-driver? *** Log without implicit tuner type specified: *** i2c-algo-bit.o: i2c bit algorithm module Linux video capture interface: v1.00 bttv: driver version 0.7.100 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller bttv: Bt8xx card found (0). PCI: Found IRQ 5 for device 00:0b.0 PCI: Sharing IRQ 5 with 00:07.2 PCI: Sharing IRQ 5 with 00:07.3 PCI: Sharing IRQ 5 with 00:0b.1 bttv0: Bt878 (rev 17) at 00:0b.0, irq: 5, latency: 32, mmio: 0xe3000000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: BT878(Pinnacle PCTV Studio Pr) [card=52,insmod option] bttv0: i2c attach [client=EEPROM chip,ok] i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 0). bttv0: i2c attach [client=EEPROM chip,ok] i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 1). bttv0: i2c attach [client=EEPROM chip,ok] i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 2). bttv0: i2c attach [client=EEPROM chip,ok] i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 3). i2c-core.o: adapter bt848 #0 registered as adapter 2. bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes i2c-core.o: driver i2c tda9887 driver registered. tda9887: ignoring SMBus Via Pro adapter at 5000 i2c adapter [id=0x40002] tda9887: ignoring ISA main adapter i2c adapter [id=0x50000] tda9887: probing bt848 #0 i2c adapter [id=0x10005] tda9887: chip found @ 0x86 bttv0: i2c attach [client=tda9887,ok] i2c-core.o: client [tda9887] registered to adapter [bt848 #0](pos. 4). bttv0: using tuner=14 bttv0: i2c: checking for MSP34xx @ 0x80... found i2c-core.o: driver i2c msp3400 driver registered. msp34xx: init: chip=MSP3410G-B11, has NICAM support msp3410: daemon started bttv0: i2c attach [client=MSP3410G-B11,ok] i2c-core.o: client [MSP3410G-B11] registered to adapter [bt848 #0](pos. 5). bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: ignoring SMBus Via Pro adapter at 5000 i2c adapter [id=0x40002] tuner: ignoring ISA main adapter i2c adapter [id=0x50000] tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc0 tuner: type set to 14 (Temic PAL_BG (4006FH5)) bttv0: i2c attach [client=Temic PAL_BG (4006FH5),ok] i2c-core.o: client [Temic PAL_BG (4006FH5)] registered to adapter [bt848 #0](pos. 6). bttv0: PLL: 28636363 => 35468950 ... ok bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
