On Tue, Nov 12, 2002 at 10:48:20PM +0200, Madis Listak wrote: > Sundara Pandian wrote: > > > Hello everyone.. > > I recently installed redhat 8.0 and want to get my Hauppauge Wintv > > card working on it,c an anyone point me to a step by step tutorial on > > how to do it, i recently saw looked up the > > http://www.exploits.org/v4l/ but theres way too much info in there.. > > > > HELP :) > > pandian. > > > I have same card and Rh 8.0 > 1. make sure your card has interupt not shared with some other card > 2. add following to /etc/modules.conf > > alias char-major-81 bttv > options bttv card=10 radio=1
That works for bt878 based cards. My Hauppauge WinTV has a bt849a so it needs card=2. lspci will tell which chip is used. Also my card happily shares the interrupt with a 3com 905c. -- Ville Syrj�l� [EMAIL PROTECTED] http://www.sci.fi/~syrjala/ -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@;redhat.com?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/video4linux-list
