On 8 May 00 at 19:47, [EMAIL PROTECTED] wrote:
> Jacek Pop?awski wrote:
> > I have AVerMedia TV Phone 98 Stereo card. Everything works good, except... mono.
> > Bttv assumes, that all channels are stereo. mono switch in xawtv or kwintw
> > don't work.
> And I got a new entry for the phone98 by mail a few days ago:
>
> { "AVerMedia TVPhone 98",
> 3, 4, 0, 2, 4, { 2, 3, 1, 1}, { 13, 14, 11, 7, 0, 0},0,
> 1,1,1,1,0,0,0,1, PLL_28, 5 },
> Does this one work better?
> If not: Which sound processor this card has?
Hi Gerd,
TDA9840. It is hardwired to stereo (0x2A) in bttv.c, but unfortunately
(at least mine) TV Phone 98 uses TDA9822 (non-i2c ...) for sound system
and is hardwired to mode which does not match with stereo/dual system used
here in Czech Republic :-( Or at least I did not found GPIO pins which drive
this mode...
Petr
P.S.: At least mask in line above is wrong - GPIO pins 3,2 select input/output
sound connection, so both must be set for output mode.
--
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
