Using 0.7.30 and kwintv 0.7.1
The odd part is, the radio works fine, but I get no sound when
watching tv. Am i missing something?
loading bttv via "modprobe bttv card=10 radio=1"
All the modules are loaded, everything looks like it's doing the
right thing. I get a resounding click whenever changing channels in kwintv
(didn't someone already suggest muting the audio right before changing
channels?).
Suggestions? I'm lost. The sum total of dmesg output since loading
the driver is below.
- Eric
Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.30 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Bt8xx card found (0).
bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 88, irq: 18, memory:
0xef102000.
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: model: BT878(Hauppauge new (bt878))
bttv0: Hauppauge eeprom: tuner=Philips FM1236 (2)
bttv0: Hauppauge msp34xx: reset line init
bttv0: i2c: checking for MSP34xx @ 0x80... found
i2c-core.o: adapter unregistered: bt848 #0
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... found
i2c-core.o: driver i2c msp3400 driver registered.
msp3400: init: chip=MSP3430G-A1, has NICAM support
msp3400: daemon started
bttv0: i2c attach [MSP3430G-A1]
i2c-core.o: client [MSP3430G-A1] registered to adapter [bt848 #0](pos. 0).
bttv0: i2c: checking for TDA8425 @ 0x82... not found
bttv0: i2c: checking for TDA985x @ 0xb6... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0x61
bttv0: i2c attach [Philips NTSC]
i2c-core.o: client [Philips NTSC] registered to adapter [bt848 #0](pos.
1).
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: PLL: switching off
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: PLL: switching off
i2c-algo-bit.o: bt848 #0 i2c_write: error - bailout.
msp34xx: I/O error #1 (write 0x10/0x93)
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: PLL: switching off
--
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
