Oops, I should have read down further on this email. It
appears that you've supplied all of the configuration info
already. Tell me though, have you been able to get it to
work okay with XFree86 X-Windows using this configuration?
Sincerely,
Tim Schoenfelder
Cedar Falls, IA
Forwarded Message:
> To: [EMAIL PROTECTED], [EMAIL PROTECTED]
> From: [EMAIL PROTECTED]
> Subject: Re: [V4L] STB TVPCI Audio Strangeness
> Date: Mon, 16 Oct 2000 18:06:49 CST
> -----
> I purchased a Gateway Destination with the STB TVPCI Card
> on it. My biggest problem was getting it to work with X-
> Windows. I finally wrote to Connexent? the chipmaker
that
> purchased Brooktree. Their manual stated specifically
that
> it would work with X-Windows. I asked them if I could
have
> any example test code to try it with X-Free or to give to
X-
> Free Developers to write a driver. They said that they
> couldn't release anything to me at that time.
>
> Have any of you been successful in getting it to work
with
> X-Windows? If so, could you tell me how to set it up
(I've
> got two of these cards)?
>
> Tim Schoenfelder
> Cedar Falls, IA USA
>
> > Hmm... I wrote the tda7432 driver, but didn't have
> anything to test it
> > on,* so it was just a stab in the dark. One guy said
it
> worked. :)
> >
> > I'll have to take a look at that debug output when I
get
> a minute...
> >
> > Gerd, is there any reason that you shouldn't use the
> tvaudio module with
> > a stand-alone audio module? Will they co-exist
> peacefully?
> >
> > -Eric
> >
> > *STB was going to send me a card, but they sent the
wrong
> one...
> >
> > Dave & Adina Ewaldz wrote:
> > >
> > > I have a STB TVPCI card that previously worked great
in
> a Win98 machine and
> > > I have now moved it to my Linux box with a problem.
> > >
> > > The problem is audio is not working consistantly.
> >
> > <snip>
> >
> > > My modules config is as follows:
> >
> > <snip>
> >
> > > # bttv
> > > alias char-major-81 videodev
> > > alias char-major-81-0 bttv
> > > options bttv card=40 radio=1 bttv_verbose=2
> > > options tuner debug=1 type=2
> > > options tvaudio debug=1 tda9850=1
> > > options tvmixer debug=1 devnr=1
> > > pre-install bttv
> (/sbin/modprobe "tuner"; /sbin/modprobe "tvaudio"; \
> >
>
> /sbin/modprobe "tda7432"; /sbin/modprobe
> "tvmixer")
> > > post-remove bttv (/sbin/modprobe -
> r "tuner"; /sbin/modprobe -r "tvaudio"; \
> > > /sbin/modprobe -
> r "tda7432"; /sbin/modprobe -r "tvmixer")
> >
> >
> >
> > _______________________________________________
> > Video4linux-list mailing list
> > [EMAIL PROTECTED]
> > https://listman.redhat.com/mailman/listinfo/video4linux-
> list
> >
> >
>
>
> ---------------------------------------------
> This message was sent using CedarNet Webmail v3.0.11 cn
0.2.
> http://www.cedarnet.org/cgi-bin/webmail.cgi
>
>
>
>
---------------------------------------------
This message was sent using CedarNet Webmail v3.0.11 cn 0.2.
http://www.cedarnet.org/cgi-bin/webmail.cgi
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
