On Thu, 26 Oct 2000, Will Heyman wrote:
> I installed the following modules:
>
> insmod videodev
> insmod i2c-old
> insmod tuner
> insmod bttv radio=1
Hi!
You did not load the module msp3400.
This could solve your problem..
You can try this (from a READMEFILE)
--------------------- snip ------------------
For automatic load of modules, you have to set the parameters in the
/etc/conf.modules file. Here two samples for WinTV cards.
- old Hauppauge WinTV (Bt848 rev 17), Temic 4002FH5 PAL tuner:
options bttv card=2 pll=0
post-install bttv /sbin/modprobe "-k" "tuner" "type=0"
post-remove bttv /sbin/modprobe "-r" "tuner"
- new Hauppauge WinTV (Bt878 rev 2), Phillips FI1216 MK2 tuner,
with MSP3410D-B4 Chip:
options bttv card=10 pll=1
post-install bttv /sbin/modprobe "-k" "msp3400"
post-install bttv /sbin/modprobe "-k" "tuner"
post-remove bttv /sbin/modprobe "-r" "msp3400"
post-remove bttv /sbin/modprobe "-r" "tuner"
--------------------- snip ------------------
I use this under SuSe and all goes well..
Hope its help.
__
Knut Johannsen medialus ICD GmbH
Email: [EMAIL PROTECTED] Ditmar Koel Strasse 23 a
Tel: +49.40.31167290 20459 Hamburg
Fax: +49.40.31167382
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
