And a surprise to me too - since this suggestion isn't supported by the
   evidence of Strad's stringing instructions!
   For example the violin stringing sizes of Tartini/Riccati (eighteenth
   century) applied to the guitar:
   - on the fourth course the instructions pretty clearly suggest a low
   bourdon on the 'treble' side which is thicker (0.95/0.89mm) than the
   third course (0.70/0.73mm) (the fourth high octave treble is 0.55mm);
   - on the fifth course the bourdon is even thicker at 1.13/1.06mm with a
   high octave treble of 0.66/0.69mm.
   Yes, as said, the analysis was a bit speculative - but not so much out
   as to result in stringing at the wrong octave!
   Further, is your proposer an advocate of tiny five course guitars? -
   for a string to reach d'' (ie an octave and a tone above middle C)
   without snapping would require a string length of only around
   35cm...................  I know of one recent publication which
   promoted this diminutive sort of size for early four course guitars (in
   fact unlikely in my view), but not for the later five course instrument
   where we have so much iconographic and other evidence on size.
   regards
   Martyn

   On Wednesday, 26 June 2019, 09:33:51 BST, Monica Hall
   <[email protected]> wrote:
   Hi Martyn
   Thank you for this. I've read your article several times and I think I
   have understood it although when it comes anything mathematical I am
   seriously challenged.
   What I was really wondering was - these instructions obviously apply to
   the chitarra atiorbata but should we assume that they also apply to a
   "standard" 5-course  guitar without additional open basses?
   One of the reasons for raising this is that recently someone has
   suggested that these instructions indicate that there were no bourdons
   on the 4th and 5th courses. The 4th and 5th courses were re-entrant
   with high octave strings - instead of being aA d'd they were tuned a'a
   d" d'.
   This came as rather a surprise to me.
   As ever
   Monica
   > On 26 June 2019 at 09:10 Martyn Hodgson
   <[1][email protected]> wrote:
   >
   >
   >    Dear Monica,
   >
   >    Have a look at FoMRHI Comm 663 (Bulletin 41, October 1985) in
   which I report on two early sources of recorded violin string diameters
   (Tartini's and Riccati's) and their application to Strad's instructions
   for the  chitarra tiorbata.
   >
   >    Here's the link
   >
   >    [2]https://www.fomrhi.org/uploads/bulletins/Fomrhi-041.pdf
   >
   >    I presume Strad related more to the violin and hence their string
   sizes since these were such a substantial part of his output and more
   common....  I also briefly discuss the translation of his instructions
   which is generally in line with what you say below.
   >
   >    I applied these sizes to guitar stringing and arrived at average
   tension of artound 3.2Kg per string and a total tension on the
   chitarra tiorbata of around 34Kg.  But I thought it prudent to express
   some caution then, as I'll also do now:    " The speculative nature of
   some of the previous analysis means that few unequivocal  conclusions
   may be drawn...."    Nevertheless, I believed then, and still do, it
   gives a reasonable indication of the tensions employed.
   >
   >    regards
   >
   >    Martyn
   >
   >    On Wednesday, 26 June 2019, 07:31:05 BST, Monica Hall
   <[3][email protected]> wrote:
   >
   >
   >      I have been puzzling over the Stradivarius stringing
   instructions for
   >      the chitarra ttiorbata again.
   >
   >      I have two queries.
   >
   >      Why should he compare the strings of the third, fourth and fifth
   >      courses to violin strings rather than those on the (presumably)
   >      standard 5-course guitar. Does this imply that they should be of
   a
   >      different thickness to the strings used on the guitar.
   >
   >      Also - the first string of the violin is tuned more or less to
   e''
   >      whereas the third course of the guitar is tuned g - an octave &
   a 6th
   >      lower. There is a considerable difference in string length
   between the
   >      violin and guitar. Would this make it practicable to tune the
   strings
   >      to completely different pitches.
   >
   >      Here are the instructions.
   >
   >      [First & second strings: These must be like two guitar first
   strings
   >      (cantini)
   >      Third & fourth strings: These must be like two guitar second
   strings
   >      (sotanelle)]
   >
   >      Fifth & sixth strings: These must be like two thick violin first
   >      strings (cantini) g
   >
   >      Seventh string: This must be a violin second string (canto) d
   >
   >      Eighth string: This must be a guitar second string (sotanella)
   d'
   >
   >      Ninth string: This must be a thicker violin second string
   (canto) a
   >
   >      Tenth string: This must be a violin first string (cantino) a'
   >
   >      They have never really seemed to make sense to me but perhaps I
   am
   >      missing something.
   >
   >      As ever
   >
   >      Monica
   >
   >
   >    To get on or off this list see list information at
   >    [4]http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html
   >
   --

   --

References

   1. mailto:[email protected]
   2. https://www.fomrhi.org/uploads/bulletins/Fomrhi-041.pdf
   3. mailto:[email protected]
   4. http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html

Reply via email to