Patch 7.4.036
Problem: NFA engine does not capture group correctly when using \@>. (ZyX)
Solution: Copy submatches before doing the recursive match.
Files: src/regexp_nfa.c, src/testdir/test64.in, src/testdir/test64.ok
*** ../vim-7.4.035/src/regexp_nfa.c 2013-09-22 13:57:19.000000000 +0200
--- src/regexp_nfa.c 2013-09-25 16:35:54.000000000 +0200
***************
*** 36,42 ****
{
NFA_SPLIT = -1024,
NFA_MATCH,
! NFA_SKIP_CHAR, /* matches a 0-length char */
NFA_START_COLL, /* [abc] start */
NFA_END_COLL, /* [abc] end */
--- 36,42 ----
{
NFA_SPLIT = -1024,
NFA_MATCH,
! NFA_EMPTY, /* matches 0-length */
NFA_START_COLL, /* [abc] start */
NFA_END_COLL, /* [abc] end */
***************
*** 2005,2012 ****
{
/* Ignore result of previous call to nfa_regatom() */
post_ptr = post_start + my_post_start;
! /* NFA_SKIP_CHAR has 0-length and works everywhere */
! EMIT(NFA_SKIP_CHAR);
return OK;
}
--- 2005,2012 ----
{
/* Ignore result of previous call to nfa_regatom() */
post_ptr = post_start + my_post_start;
! /* NFA_EMPTY is 0-length and works everywhere */
! EMIT(NFA_EMPTY);
return OK;
}
***************
*** 2170,2185 ****
old_post_pos = (int)(post_ptr - post_start);
if (nfa_regconcat() == FAIL)
return FAIL;
! /* if concat is empty, skip a input char. But do emit a node */
if (old_post_pos == (int)(post_ptr - post_start))
! EMIT(NFA_SKIP_CHAR);
EMIT(NFA_CONCAT);
ch = peekchr();
}
! /* Even if a branch is empty, emit one node for it */
if (old_post_pos == (int)(post_ptr - post_start))
! EMIT(NFA_SKIP_CHAR);
return OK;
}
--- 2170,2185 ----
old_post_pos = (int)(post_ptr - post_start);
if (nfa_regconcat() == FAIL)
return FAIL;
! /* if concat is empty do emit a node */
if (old_post_pos == (int)(post_ptr - post_start))
! EMIT(NFA_EMPTY);
EMIT(NFA_CONCAT);
ch = peekchr();
}
! /* if a branch is empty, emit one node for it */
if (old_post_pos == (int)(post_ptr - post_start))
! EMIT(NFA_EMPTY);
return OK;
}
***************
*** 2423,2429 ****
case NFA_STAR_NONGREEDY: STRCPY(code, "NFA_STAR_NONGREEDY "); break;
case NFA_QUEST: STRCPY(code, "NFA_QUEST"); break;
case NFA_QUEST_NONGREEDY: STRCPY(code, "NFA_QUEST_NON_GREEDY"); break;
! case NFA_SKIP_CHAR: STRCPY(code, "NFA_SKIP_CHAR"); break;
case NFA_OR: STRCPY(code, "NFA_OR"); break;
case NFA_START_COLL: STRCPY(code, "NFA_START_COLL"); break;
--- 2423,2429 ----
case NFA_STAR_NONGREEDY: STRCPY(code, "NFA_STAR_NONGREEDY "); break;
case NFA_QUEST: STRCPY(code, "NFA_QUEST"); break;
case NFA_QUEST_NONGREEDY: STRCPY(code, "NFA_QUEST_NON_GREEDY"); break;
! case NFA_EMPTY: STRCPY(code, "NFA_EMPTY"); break;
case NFA_OR: STRCPY(code, "NFA_OR"); break;
case NFA_START_COLL: STRCPY(code, "NFA_START_COLL"); break;
***************
*** 3067,3073 ****
case NFA_ZSTART:
case NFA_ZEND:
case NFA_OPT_CHARS:
! case NFA_SKIP_CHAR:
case NFA_START_PATTERN:
case NFA_END_PATTERN:
case NFA_COMPOSING:
--- 3067,3073 ----
case NFA_ZSTART:
case NFA_ZEND:
case NFA_OPT_CHARS:
! case NFA_EMPTY:
case NFA_START_PATTERN:
case NFA_END_PATTERN:
case NFA_COMPOSING:
***************
*** 3265,3279 ****
PUSH(frag(e1.start, e2.out));
break;
! case NFA_SKIP_CHAR:
! /* Symbol of 0-length, Used in a repetition
! * with max/min count of 0 */
if (nfa_calc_size == TRUE)
{
nstate++;
break;
}
! s = alloc_state(NFA_SKIP_CHAR, NULL, NULL);
if (s == NULL)
goto theend;
PUSH(frag(s, list1(&s->out)));
--- 3265,3278 ----
PUSH(frag(e1.start, e2.out));
break;
! case NFA_EMPTY:
! /* 0-length, used in a repetition with max/min count of 0 */
if (nfa_calc_size == TRUE)
{
nstate++;
break;
}
! s = alloc_state(NFA_EMPTY, NULL, NULL);
if (s == NULL)
goto theend;
PUSH(frag(s, list1(&s->out)));
***************
*** 4209,4215 ****
case NFA_MOPEN:
case NFA_ZEND:
case NFA_SPLIT:
! case NFA_SKIP_CHAR:
/* These nodes are not added themselves but their "out" and/or
* "out1" may be added below. */
break;
--- 4208,4214 ----
case NFA_MOPEN:
case NFA_ZEND:
case NFA_SPLIT:
! case NFA_EMPTY:
/* These nodes are not added themselves but their "out" and/or
* "out1" may be added below. */
break;
***************
*** 4337,4343 ****
subs = addstate(l, state->out1, subs, pim, off);
break;
! case NFA_SKIP_CHAR:
case NFA_NOPEN:
case NFA_NCLOSE:
subs = addstate(l, state->out, subs, pim, off);
--- 4336,4342 ----
subs = addstate(l, state->out1, subs, pim, off);
break;
! case NFA_EMPTY:
case NFA_NOPEN:
case NFA_NCLOSE:
subs = addstate(l, state->out, subs, pim, off);
***************
*** 5604,5612 ****
{
int in_use = m->norm.in_use;
! /* Copy submatch info for the recursive call, so that
! * \1 can be matched. */
copy_sub_off(&m->norm, &t->subs.norm);
/*
* First try matching the invisible match, then what
--- 5603,5615 ----
{
int in_use = m->norm.in_use;
! /* Copy submatch info for the recursive call, opposite
! * of what happens on success below. */
copy_sub_off(&m->norm, &t->subs.norm);
+ #ifdef FEAT_SYN_HL
+ if (nfa_has_zsubexpr)
+ copy_sub_off(&m->synt, &t->subs.synt);
+ #endif
/*
* First try matching the invisible match, then what
***************
*** 5713,5718 ****
--- 5716,5728 ----
#endif
break;
}
+ /* Copy submatch info to the recursive call, opposite of what
+ * happens afterwards. */
+ copy_sub_off(&m->norm, &t->subs.norm);
+ #ifdef FEAT_SYN_HL
+ if (nfa_has_zsubexpr)
+ copy_sub_off(&m->synt, &t->subs.synt);
+ #endif
/* First try matching the pattern. */
result = recursive_regmatch(t->state, NULL, prog,
*** ../vim-7.4.035/src/testdir/test64.in 2013-09-22 13:57:19.000000000
+0200
--- src/testdir/test64.in 2013-09-25 15:51:12.000000000 +0200
***************
*** 430,435 ****
--- 430,436 ----
:call add(tl, [2, '\(a*\)\@>a', 'aaaa'])
:call add(tl, [2, '\(a*\)\@>b', 'aaab', 'aaab', 'aaa'])
:call add(tl, [2, '^\(.\{-}b\)\@>.', ' abcbd', ' abc', ' ab'])
+ :call add(tl, [2, '\(.\{-}\)\(\)\@>$', 'abc', 'abc', 'abc', ''])
:" TODO: BT engine does not restore submatch after failure
:call add(tl, [1, '\(a*\)\@>a\|a\+', 'aaaa', 'aaaa'])
:"
*** ../vim-7.4.035/src/testdir/test64.ok 2013-09-22 13:57:19.000000000
+0200
--- src/testdir/test64.ok 2013-09-25 16:39:31.000000000 +0200
***************
*** 992,997 ****
--- 992,1000 ----
OK 0 - ^\(.\{-}b\)\@>.
OK 1 - ^\(.\{-}b\)\@>.
OK 2 - ^\(.\{-}b\)\@>.
+ OK 0 - \(.\{-}\)\(\)\@>$
+ OK 1 - \(.\{-}\)\(\)\@>$
+ OK 2 - \(.\{-}\)\(\)\@>$
OK 0 - \(a*\)\@>a\|a\+
OK 2 - \(a*\)\@>a\|a\+
OK 0 - \_[^8-9]\+
*** ../vim-7.4.035/src/version.c 2013-09-22 15:43:34.000000000 +0200
--- src/version.c 2013-09-25 16:40:01.000000000 +0200
***************
*** 740,741 ****
--- 740,743 ----
{ /* Add new patch number below this line */
+ /**/
+ 36,
/**/
--
There is a fine line between courage and foolishness.
Unfortunately, it's not a fence.
/// Bram Moolenaar -- [email protected] -- http://www.Moolenaar.net \\\
/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
\\\ an exciting new programming language -- http://www.Zimbu.org ///
\\\ help me help AIDS victims -- http://ICCF-Holland.org ///
--
--
You received this message from the "vim_dev" maillist.
Do not top-post! Type your reply below the text you are replying to.
For more information, visit http://www.vim.org/maillist.php
---
You received this message because you are subscribed to the Google Groups
"vim_dev" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
