Patch 7.4.389
Problem: Still sometimes Vim enters Replace mode when starting up.
Solution: Use a different solution in detecting the termresponse and
location response. (Hayaki Saito)
Files: src/globals.h, src/os_unix.c, src/term.c, src/proto/term.pro
*** ../vim-7.4.388/src/globals.h 2014-06-12 14:01:27.575769788 +0200
--- src/globals.h 2014-07-30 17:02:57.711526671 +0200
***************
*** 1336,1344 ****
#if defined(UNIX) || defined(VMS)
EXTERN int term_is_xterm INIT(= FALSE); /* xterm-like 'term' */
#endif
- #if defined(UNIX)
- EXTERN int xterm_conflict_mouse INIT(= FALSE);
- #endif
#ifdef BACKSLASH_IN_FILENAME
EXTERN char psepc INIT(= '\\'); /* normal path separator character */
--- 1336,1341 ----
*** ../vim-7.4.388/src/os_unix.c 2014-07-09 19:13:45.007701718 +0200
--- src/os_unix.c 2014-07-30 17:06:02.375525344 +0200
***************
*** 3667,3674 ****
void
check_mouse_termcode()
{
- xterm_conflict_mouse = FALSE;
-
# ifdef FEAT_MOUSE_XTERM
if (use_xterm_mouse()
# ifdef FEAT_MOUSE_URXVT
--- 3667,3672 ----
***************
*** 3713,3719 ****
# endif
# ifdef FEAT_MOUSE_JSB
! /* There is no conflict, but it was disabled for xterm before. */
if (!use_xterm_mouse()
# ifdef FEAT_GUI
&& !gui.in_use
--- 3711,3717 ----
# endif
# ifdef FEAT_MOUSE_JSB
! /* Conflicts with xterm mouse: "\033[" and "\033[M" ??? */
if (!use_xterm_mouse()
# ifdef FEAT_GUI
&& !gui.in_use
***************
*** 3740,3784 ****
# endif
# ifdef FEAT_MOUSE_DEC
! /* Conflicts with xterm mouse: "\033[" and "\033[M".
! * Also conflicts with the xterm termresponse, skip this if it was
! * requested already. */
if (!use_xterm_mouse()
- # ifdef FEAT_TERMRESPONSE
- && !did_request_esc_sequence()
- # endif
# ifdef FEAT_GUI
&& !gui.in_use
# endif
)
- {
set_mouse_termcode(KS_DEC_MOUSE, (char_u *)(term_is_8bit(T_NAME)
? IF_EB("\233", CSI_STR) : IF_EB("\033[", ESC_STR "[")));
- xterm_conflict_mouse = TRUE;
- }
else
del_mouse_termcode(KS_DEC_MOUSE);
# endif
# ifdef FEAT_MOUSE_PTERM
! /* same as the dec mouse */
if (!use_xterm_mouse()
- # ifdef FEAT_TERMRESPONSE
- && !did_request_esc_sequence()
- # endif
# ifdef FEAT_GUI
&& !gui.in_use
# endif
)
- {
set_mouse_termcode(KS_PTERM_MOUSE,
(char_u *) IF_EB("\033[", ESC_STR "["));
- xterm_conflict_mouse = TRUE;
- }
else
del_mouse_termcode(KS_PTERM_MOUSE);
# endif
# ifdef FEAT_MOUSE_URXVT
! /* same as the dec mouse */
if (use_xterm_mouse() == 3
# ifdef FEAT_GUI
&& !gui.in_use
--- 3738,3768 ----
# endif
# ifdef FEAT_MOUSE_DEC
! /* Conflicts with xterm mouse: "\033[" and "\033[M" */
if (!use_xterm_mouse()
# ifdef FEAT_GUI
&& !gui.in_use
# endif
)
set_mouse_termcode(KS_DEC_MOUSE, (char_u *)(term_is_8bit(T_NAME)
? IF_EB("\233", CSI_STR) : IF_EB("\033[", ESC_STR "[")));
else
del_mouse_termcode(KS_DEC_MOUSE);
# endif
# ifdef FEAT_MOUSE_PTERM
! /* same conflict as the dec mouse */
if (!use_xterm_mouse()
# ifdef FEAT_GUI
&& !gui.in_use
# endif
)
set_mouse_termcode(KS_PTERM_MOUSE,
(char_u *) IF_EB("\033[", ESC_STR "["));
else
del_mouse_termcode(KS_PTERM_MOUSE);
# endif
# ifdef FEAT_MOUSE_URXVT
! /* same conflict as the dec mouse */
if (use_xterm_mouse() == 3
# ifdef FEAT_GUI
&& !gui.in_use
***************
*** 3794,3801 ****
mch_setmouse(FALSE);
setmouse();
}
- /* It's OK to request the xterm version for uxterm. */
- resume_get_esc_sequence();
}
else
del_mouse_termcode(KS_URXVT_MOUSE);
--- 3778,3783 ----
*** ../vim-7.4.388/src/term.c 2014-07-09 20:51:04.519583033 +0200
--- src/term.c 2014-07-30 17:20:54.915518929 +0200
***************
*** 153,163 ****
static char_u *vim_tgetstr __ARGS((char *s, char_u **pp));
#endif /* HAVE_TGETENT */
- #if defined(FEAT_TERMRESPONSE)
- static int xt_index_in = 0;
- static int xt_index_out = 0;
- #endif
-
static int detected_8bit = FALSE; /* detected 8-bit terminal */
static struct builtin_term builtin_termcaps[] =
--- 153,158 ----
***************
*** 3312,3351 ****
}
#if defined(FEAT_TERMRESPONSE) || defined(PROTO)
- # if defined(UNIX) || defined(PROTO)
- /*
- * Return TRUE when the xterm version was requested or anything else that
- * would send an ESC sequence back to Vim.
- * If not sent yet, prevent it from being sent soon.
- * Used to check whether it is OK to enable checking for DEC mouse codes,
- * which conflict with may xterm ESC sequences.
- */
- int
- did_request_esc_sequence()
- {
- if (crv_status == CRV_GET)
- crv_status = 0;
- if (u7_status == U7_GET)
- u7_status = 0;
- return crv_status == CRV_SENT || u7_status == U7_SENT
- || xt_index_out > xt_index_in;
- }
-
- /*
- * If requesting the version was disabled in did_request_esc_sequence(),
- * enable it again.
- */
- void
- resume_get_esc_sequence()
- {
- if (crv_status == 0)
- crv_status = CRV_GET;
- if (u7_status == 0)
- u7_status = U7_GET;
- }
- # endif
-
-
/*
* Request version string (for xterm) when needed.
* Only do this after switching to raw mode, otherwise the result will be
--- 3307,3312 ----
***************
*** 3358,3365 ****
* Insert mode.
* On Unix only do it when both output and input are a tty (avoid writing
* request to terminal while reading from a file).
- * Do not do this when a mouse is being detected that starts with the same ESC
- * sequence as the termresponse.
* The result is caught in check_termcode().
*/
void
--- 3319,3324 ----
***************
*** 3373,3379 ****
# ifdef UNIX
&& isatty(1)
&& isatty(read_cmd_fd)
- && !xterm_conflict_mouse
# endif
&& *T_CRV != NUL)
{
--- 3332,3337 ----
***************
*** 3742,3749 ****
#if defined(WIN3264) && !defined(FEAT_GUI)
if (s[0] == K_NUL)
{
! STRMOVE(s + 1, s);
! s[1] = 3;
}
#endif
--- 3700,3707 ----
#if defined(WIN3264) && !defined(FEAT_GUI)
if (s[0] == K_NUL)
{
! STRMOVE(s + 1, s);
! s[1] = 3;
}
#endif
***************
*** 4212,4235 ****
#ifdef FEAT_TERMRESPONSE
if (key_name[0] == NUL
! /* URXVT mouse uses <ESC>[#;#;#M, but we are matching <ESC>[ */
|| key_name[0] == KS_URXVT_MOUSE
- # ifdef FEAT_MBYTE
- || u7_status == U7_SENT
# endif
! )
{
! /* Check for some responses from terminal start with "<Esc>[" or
! * CSI.
*
! * - xterm version string: <Esc>[>{x};{vers};{y}c
* Also eat other possible responses to t_RV, rxvt returns
* "<Esc>[?1;2c". Also accept CSI instead of <Esc>[.
* mrxvt has been reported to have "+" in the version. Assume
* the escape sequence ends with a letter or one of "{|}~".
*
! * - cursor position report: <Esc>[{row};{col}R
! * The final byte is 'R'. now it is only used for checking for
* ambiguous-width character state.
*/
p = tp[0] == CSI ? tp + 1 : tp + 2;
--- 4170,4200 ----
#ifdef FEAT_TERMRESPONSE
if (key_name[0] == NUL
! /* Mouse codes of DEC, pterm, and URXVT start with <ESC>[. When
! * detecting the start of these mouse codes they might as well be
! * another key code or terminal response. */
! # ifdef FEAT_MOUSE_DEC
! || key_name[0] == KS_DEC_MOUSE
! # endif
! # ifdef FEAT_MOUSE_PTERM
! || key_name[0] == KS_PTERM_MOUSE
! # endif
! # ifdef FEAT_MOUSE_URXVT
|| key_name[0] == KS_URXVT_MOUSE
# endif
! )
{
! /* Check for some responses from the terminal starting with
! * "<Esc>[" or CSI:
*
! * - Xterm version string: <Esc>[>{x};{vers};{y}c
* Also eat other possible responses to t_RV, rxvt returns
* "<Esc>[?1;2c". Also accept CSI instead of <Esc>[.
* mrxvt has been reported to have "+" in the version. Assume
* the escape sequence ends with a letter or one of "{|}~".
*
! * - Cursor position report: <Esc>[{row};{col}R
! * The final byte must be 'R'. It is used for checking the
* ambiguous-width character state.
*/
p = tp[0] == CSI ? tp + 1 : tp + 2;
***************
*** 4269,4304 ****
* u7_status is not "sent", it may be from a previous Vim that
* just exited. But not for <S-F3>, it sends something
* similar, check for row and column to make sense. */
! if (j == 1 && tp[i] == 'R' && row_char == '2' && col >= 2)
{
! char *aw = NULL;
! LOG_TR("Received U7 status");
! u7_status = U7_GOT;
# ifdef FEAT_AUTOCMD
! did_cursorhold = TRUE;
# endif
! if (col == 2)
! aw = "single";
! else if (col == 3)
! aw = "double";
! if (aw != NULL && STRCMP(aw, p_ambw) != 0)
! {
! /* Setting the option causes a screen redraw. Do that
! * right away if possible, keeping any messages. */
! set_option_value((char_u *)"ambw", 0L, (char_u *)aw, 0);
! # ifdef DEBUG_TERMRESPONSE
{
! char buf[100];
! int r = redraw_asap(CLEAR);
! sprintf(buf, "set 'ambiwidth', redraw_asap(): %d",
! r);
! log_tr(buf);
! }
# else
! redraw_asap(CLEAR);
# endif
}
key_name[0] = (int)KS_EXTRA;
key_name[1] = (int)KE_IGNORE;
--- 4234,4275 ----
* u7_status is not "sent", it may be from a previous Vim that
* just exited. But not for <S-F3>, it sends something
* similar, check for row and column to make sense. */
! if (j == 1 && tp[i] == 'R')
{
! if (row_char == '2' && col >= 2)
! {
! char *aw = NULL;
! LOG_TR("Received U7 status");
! u7_status = U7_GOT;
# ifdef FEAT_AUTOCMD
! did_cursorhold = TRUE;
# endif
! if (col == 2)
! aw = "single";
! else if (col == 3)
! aw = "double";
! if (aw != NULL && STRCMP(aw, p_ambw) != 0)
{
! /* Setting the option causes a screen redraw. Do
! * that right away if possible, keeping any
! * messages. */
! set_option_value((char_u *)"ambw", 0L,
! (char_u *)aw, 0);
! # ifdef DEBUG_TERMRESPONSE
! {
! char buf[100];
! int r = redraw_asap(CLEAR);
! sprintf(buf,
! "set 'ambiwidth', redraw_asap(): %d",
! r);
! log_tr(buf);
! }
# else
! redraw_asap(CLEAR);
# endif
+ }
}
key_name[0] = (int)KS_EXTRA;
key_name[1] = (int)KE_IGNORE;
***************
*** 4563,4581 ****
return -1;
/* when mouse reporting is SGR, add 32 to mouse code */
! if (key_name[0] == KS_SGR_MOUSE)
! mouse_code += 32;
mouse_col = getdigits(&p) - 1;
if (*p++ != ';')
return -1;
mouse_row = getdigits(&p) - 1;
! if (key_name[0] == KS_SGR_MOUSE && *p == 'm')
mouse_code |= MOUSE_RELEASE;
! else if (*p != 'M')
return -1;
! p++;
slen += (int)(p - (tp + slen));
--- 4534,4552 ----
return -1;
/* when mouse reporting is SGR, add 32 to mouse code */
! if (key_name[0] == KS_SGR_MOUSE)
! mouse_code += 32;
mouse_col = getdigits(&p) - 1;
if (*p++ != ';')
return -1;
mouse_row = getdigits(&p) - 1;
! if (key_name[0] == KS_SGR_MOUSE && *p == 'm')
mouse_code |= MOUSE_RELEASE;
! else if (*p != 'M')
return -1;
! p++;
slen += (int)(p - (tp + slen));
***************
*** 4592,4598 ****
for (slen2 = slen; slen2 < len; slen2++)
{
if (tp[slen2] == 'M'
! || (key_name[0] == KS_SGR_MOUSE
&& tp[slen2] == 'm'))
{
cmd_complete = 1;
--- 4563,4569 ----
for (slen2 = slen; slen2 < len; slen2++)
{
if (tp[slen2] == 'M'
! || (key_name[0] == KS_SGR_MOUSE
&& tp[slen2] == 'm'))
{
cmd_complete = 1;
***************
*** 5769,5774 ****
--- 5740,5748 ----
* termcap codes from the terminal itself.
* We get them one by one to avoid a very long response string.
*/
+ static int xt_index_in = 0;
+ static int xt_index_out = 0;
+
static void
req_codes_from_term()
{
*** ../vim-7.4.388/src/proto/term.pro 2014-07-09 19:13:45.007701718 +0200
--- src/proto/term.pro 2014-07-30 17:04:40.791525930 +0200
***************
*** 34,41 ****
void settmode __ARGS((int tmode));
void starttermcap __ARGS((void));
void stoptermcap __ARGS((void));
- int did_request_esc_sequence __ARGS((void));
- void resume_get_esc_sequence __ARGS((void));
void may_req_termresponse __ARGS((void));
void may_req_ambiguous_char_width __ARGS((void));
int swapping_screen __ARGS((void));
--- 34,39 ----
*** ../vim-7.4.388/src/version.c 2014-07-30 16:44:17.503534723 +0200
--- src/version.c 2014-07-30 17:03:13.715526556 +0200
***************
*** 736,737 ****
--- 736,739 ----
{ /* Add new patch number below this line */
+ /**/
+ 389,
/**/
--
The only way the average employee can speak to an executive is by taking a
second job as a golf caddie.
(Scott Adams - The Dilbert principle)
/// Bram Moolenaar -- [email protected] -- http://www.Moolenaar.net \\\
/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
\\\ an exciting new programming language -- http://www.Zimbu.org ///
\\\ help me help AIDS victims -- http://ICCF-Holland.org ///
--
--
You received this message from the "vim_dev" maillist.
Do not top-post! Type your reply below the text you are replying to.
For more information, visit http://www.vim.org/maillist.php
---
You received this message because you are subscribed to the Google Groups
"vim_dev" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
