Patch 8.2.4881
Problem: "P" in Visual mode still changes some registers.
Solution: Make "P" in Visual mode not change any register. (Shougo
Matsushita, closes #10349)
Files: runtime/doc/change.txt, runtime/doc/index.txt,
runtime/doc/visual.txt, src/normal.c, src/testdir/test_visual.vim
*** ../vim-8.2.4880/runtime/doc/change.txt 2021-06-10 18:39:07.273697695
+0100
--- runtime/doc/change.txt 2022-05-06 11:34:59.744449217 +0100
***************
*** 1162,1181 ****
and whether the corners are on an existing character. (Implementation detail:
it actually works by first putting the register after the selection and then
deleting the selection.)
! The previously selected text is put in the unnamed register. If you want to
! put the same text into a Visual selection several times you need to use
! another register. E.g., yank the text to copy, Visually select the text to
! replace and use "0p . You can repeat this as many times as you like, the
! unnamed register will be changed each time.
When you use a blockwise Visual mode command and yank only a single line into
a register, a paste on a visual selected area will paste that single line on
each of the selected lines (thus replacing the blockwise selected region by a
block of the pasted line).
- Use |zP|/|zp| to paste a blockwise yanked register without appending trailing
- spaces.
-
*blockwise-register*
If you use a blockwise Visual mode command to get the text into the register,
the block of text will be inserted before ("P") or after ("p") the cursor
--- 1177,1197 ----
and whether the corners are on an existing character. (Implementation detail:
it actually works by first putting the register after the selection and then
deleting the selection.)
! With |p| the previously selected text is put in the unnamed register (and
! possibly the selection and/or clipboard). This is useful if you want to put
! that text somewhere else. But you cannot repeat the same change.
! With |P| the unnamed register is not changed (and neither the selection or
! clipboard), you can repeat the same change. But the deleted text cannot be
! used. If you do need it you can use |p| with another register. E.g., yank
! the text to copy, Visually select the text to replace and use "0p . You can
! repeat this as many times as you like, and the unnamed register will be
! changed each time.
When you use a blockwise Visual mode command and yank only a single line into
a register, a paste on a visual selected area will paste that single line on
each of the selected lines (thus replacing the blockwise selected region by a
block of the pasted line).
*blockwise-register*
If you use a blockwise Visual mode command to get the text into the register,
the block of text will be inserted before ("P") or after ("p") the cursor
*** ../vim-8.2.4880/runtime/doc/index.txt 2021-12-24 20:27:58.029861532
+0000
--- runtime/doc/index.txt 2022-05-06 11:30:09.288695521 +0100
***************
*** 937,943 ****
before the highlighted area
|v_J| J 2 join the highlighted lines
|v_K| K run 'keywordprg' on the highlighted area
! |v_O| O Move horizontally to other corner of area.
Q does not start Ex mode
|v_R| R 2 delete the highlighted lines and start
insert
--- 937,945 ----
before the highlighted area
|v_J| J 2 join the highlighted lines
|v_K| K run 'keywordprg' on the highlighted area
! |v_O| O move horizontally to other corner of area
! |v_P| P replace highlighted area with register
! contents; registers are unchanged
Q does not start Ex mode
|v_R| R 2 delete the highlighted lines and start
insert
***************
*** 1000,1005 ****
--- 1002,1009 ----
|v_i{| i{ same as iB
|v_i}| i} same as iB
|v_o| o move cursor to other corner of area
+ |v_p| p replace highlighted area with register
+ contents; deleted text in unnamed register
|v_r| r 2 replace highlighted area with a character
|v_s| s 2 delete highlighted area and start insert
|v_u| u 2 make highlighted area lowercase
*** ../vim-8.2.4880/runtime/doc/visual.txt 2022-01-28 16:01:09.548028394
+0000
--- runtime/doc/visual.txt 2022-05-06 11:35:52.948402958 +0100
***************
*** 265,271 ****
X delete (2) |v_X|
Y yank (2) |v_Y|
p put |v_p|
! P put without unnamed register overwrite |v_P|
J join (1) |v_J|
U make uppercase |v_U|
u make lowercase |v_u|
--- 265,271 ----
X delete (2) |v_X|
Y yank (2) |v_Y|
p put |v_p|
! P put without overwriting registers |v_P|
J join (1) |v_J|
U make uppercase |v_U|
u make lowercase |v_u|
*** ../vim-8.2.4880/src/normal.c 2022-04-22 21:20:22.825092774 +0100
--- src/normal.c 2022-05-06 11:30:09.288695521 +0100
***************
*** 7236,7243 ****
int was_visual = FALSE;
int dir;
int flags = 0;
! int save_unnamed = FALSE;
! yankreg_T *old_y_current, *old_y_previous;
if (cap->oap->op_type != OP_NOP)
{
--- 7236,7242 ----
int was_visual = FALSE;
int dir;
int flags = 0;
! int keep_registers = FALSE;
if (cap->oap->op_type != OP_NOP)
{
***************
*** 7284,7290 ****
// overwrites if the old contents is being put.
was_visual = TRUE;
regname = cap->oap->regname;
! save_unnamed = cap->cmdchar == 'P';
#ifdef FEAT_CLIPBOARD
adjust_clip_reg(®name);
#endif
--- 7283,7289 ----
// overwrites if the old contents is being put.
was_visual = TRUE;
regname = cap->oap->regname;
! keep_registers = cap->cmdchar == 'P';
#ifdef FEAT_CLIPBOARD
adjust_clip_reg(®name);
#endif
***************
*** 7302,7327 ****
}
// Now delete the selected text. Avoid messages here.
- if (save_unnamed)
- {
- old_y_current = get_y_current();
- old_y_previous = get_y_previous();
- }
cap->cmdchar = 'd';
cap->nchar = NUL;
! cap->oap->regname = NUL;
++msg_silent;
nv_operator(cap);
do_pending_operator(cap, 0, FALSE);
empty = (curbuf->b_ml.ml_flags & ML_EMPTY);
--msg_silent;
- if (save_unnamed)
- {
- set_y_current(old_y_current);
- set_y_previous(old_y_previous);
- }
-
// delete PUT_LINE_BACKWARD;
cap->oap->regname = regname;
--- 7301,7315 ----
}
// Now delete the selected text. Avoid messages here.
cap->cmdchar = 'd';
cap->nchar = NUL;
! cap->oap->regname = keep_registers ? '_' : NUL;
++msg_silent;
nv_operator(cap);
do_pending_operator(cap, 0, FALSE);
empty = (curbuf->b_ml.ml_flags & ML_EMPTY);
--msg_silent;
// delete PUT_LINE_BACKWARD;
cap->oap->regname = regname;
*** ../vim-8.2.4880/src/testdir/test_visual.vim 2022-02-07 10:33:15.412898083
+0000
--- src/testdir/test_visual.vim 2022-05-06 11:30:09.292695517 +0100
***************
*** 1390,1423 ****
call assert_equal('x', @-)
call assert_equal('bazooxxf', getline(1))
! if has('clipboard')
! " v_P does not overwrite unnamed register.
call setline(1, ['xxxx'])
call setreg('"', 'foo')
call setreg('-', 'bar')
normal gg0vP
call assert_equal('foo', @")
! call assert_equal('x', @-)
! call assert_equal('fooxxx', getline(1))
! normal $vP
! call assert_equal('foo', @")
! call assert_equal('x', @-)
! call assert_equal('fooxxfoo', getline(1))
! " Test with a different register as unnamed register.
! call setline(2, ['baz'])
! normal 2gg0"rD
! call assert_equal('baz', @")
! normal gg0vP
! call assert_equal('baz', @")
! call assert_equal('f', @-)
! call assert_equal('bazooxxfoo', getline(1))
! normal $vP
! call assert_equal('baz', @")
! call assert_equal('o', @-)
! call assert_equal('bazooxxfobaz', getline(1))
endif
bwipe!
endfunc
" vim: shiftwidth=2 sts=2 expandtab
--- 1390,1463 ----
call assert_equal('x', @-)
call assert_equal('bazooxxf', getline(1))
! bwipe!
! endfunc
!
! func Test_visual_paste_clipboard()
! CheckFeature clipboard_working
!
! if has('gui')
! " auto select feature breaks tests
! set guioptions-=a
! endif
!
! " v_P does not overwrite unnamed register.
! call setline(1, ['xxxx'])
! call setreg('"', 'foo')
! call setreg('-', 'bar')
! normal gg0vP
! call assert_equal('foo', @")
! call assert_equal('bar', @-)
! call assert_equal('fooxxx', getline(1))
! normal $vP
! call assert_equal('foo', @")
! call assert_equal('bar', @-)
! call assert_equal('fooxxfoo', getline(1))
! " Test with a different register as unnamed register.
! call setline(2, ['baz'])
! normal 2gg0"rD
! call assert_equal('baz', @")
! normal gg0vP
! call assert_equal('baz', @")
! call assert_equal('bar', @-)
! call assert_equal('bazooxxfoo', getline(1))
! normal $vP
! call assert_equal('baz', @")
! call assert_equal('bar', @-)
! call assert_equal('bazooxxfobaz', getline(1))
!
! " Test for unnamed clipboard
! set clipboard=unnamed
! call setline(1, ['xxxx'])
! call setreg('"', 'foo')
! call setreg('-', 'bar')
! call setreg('*', 'baz')
! normal gg0vP
! call assert_equal('foo', @")
! call assert_equal('bar', @-)
! call assert_equal('baz', @*)
! call assert_equal('bazxxx', getline(1))
!
! " Test for unnamedplus clipboard
! if has('unnamedplus')
! set clipboard=unnamedplus
call setline(1, ['xxxx'])
call setreg('"', 'foo')
call setreg('-', 'bar')
+ call setreg('+', 'baz')
normal gg0vP
call assert_equal('foo', @")
! call assert_equal('bar', @-)
! call assert_equal('baz', @+)
! call assert_equal('bazxxx', getline(1))
endif
+ set clipboard&
+ if has('gui')
+ set guioptions&
+ endif
bwipe!
endfunc
+
" vim: shiftwidth=2 sts=2 expandtab
*** ../vim-8.2.4880/src/version.c 2022-05-06 11:27:48.264809846 +0100
--- src/version.c 2022-05-06 11:32:25.396581569 +0100
***************
*** 748,749 ****
--- 748,751 ----
{ /* Add new patch number below this line */
+ /**/
+ 4881,
/**/
--
hundred-and-one symptoms of being an internet addict:
112. You are amazed that anyone uses a phone without data...let
alone hear actual voices.
/// Bram Moolenaar -- [email protected] -- http://www.Moolenaar.net \\\
/// \\\
\\\ sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ ///
\\\ help me help AIDS victims -- http://ICCF-Holland.org ///
--
--
You received this message from the "vim_dev" maillist.
Do not top-post! Type your reply below the text you are replying to.
For more information, visit http://www.vim.org/maillist.php
---
You received this message because you are subscribed to the Google Groups
"vim_dev" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/vim_dev/20220506104543.DA5C01C03B1%40moolenaar.net.
