jon wrote: > I have a IIsi that wouldn't power on. I replaced the power supply, > and now it will turn on, but won't boot. Power comes on, hard drive > spins up, monitor turns on, but there's no boot sound from the speaker > and I can tell from the hard drive that it's not booting. > > Can this be the PRAM battery? I replaced it about 5 years ago, so > it's not the original. I check the voltage, and it's reading about > 3.6 volts, but maybe it's not supplying enough power. > > Will the IIsi boot if the PRAM battery is dead? Anything else I can > check?
No, the IIsi will not boot on a dead battery. But 3.6V is a good battery. Are you getting an image on the monitor? Have you tried a PRAM Zap? -- Clark Martin Redwood City, CA, USA Macintosh / Internet Consulting "I'm a designated driver on the Information Super Highway" --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
