----- Original Message ----
> From: Gregg Eshelman <[email protected]>
>
> Boot with a Mac formatted disk in the drive and it should work without a
> special
> driver extension. I did that with 44 and 88 meg Syquest drives.
>
That should work.
Also seem to recall in the in System 7.5 and 7.6 you could go to the PCExchange
Control Panel click on the "options" button and put a check next to the SCSI
device to load a driver for it. Don't know if this feature goes back as far as
System 7.1. --glen
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/vintage-macs?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---
