On Oct 18, 9:47 am, jorddo <[email protected]> wrote:
> I have almost the same problem as the other recent poster except: I
> wanted to upgrade my stock CC with an LC 575 motherboard with 68mb
> RAM, 1mb video ram and put in a 250mb hard drive with system 8.1
>
> System starts to boot then comes up with the same bus error message as
> the other poster. So I hold down the shift key and try to boot without
> the extensions and does not work.
>
> Have tried two different LC 575 mother boards and two different hard
> drives both with system 8.1 with no luck.
>
> Have poured over the FAQ's and cannot find anything that relates to
> this.
>
> What did I miss? Any ideas? Thanks for all help in advance.
>
> Don
I seem to recall (from years ago when I did this) that a different
machine id. was required to get it to run. See this page for
instructions:
http://www.micromac.com/FAQ/faq_lc575_upgrade.html
HTH!
V Mabus
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
-~----------~----~----~----~------~----~------~--~---
