Addressing IDE/ATA allows horizontal combinations of various kinds; and the drive itself has to be addressed correctly for SCSI.
Thank you for listing this up - hard to find these days. Preset drives or scanners often have unchangable IDs. >no jumper ID 0 >jumper on lowest numbered pins = ID 1 >jumper on second numbered pins = ID 2 >two jumpers on first and second = ID 3 >jumper on third = ID 4 >jumpers on first and third = ID 5 >jumpers on second and third = ID 6 >jumpers on all three = ID 7 (do not use this setting) > >If you have a SCSI II drive there are 4 ID pins and the setting for higher >ID number follow the same rules. > >It should be relatively easy to find the manual and/or jumper setting for the >drive with a google search. And that really makes the whole thing even >easiler. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ -~----------~----~----~----~------~----~------~--~---
