Hi all, Thanks for the help! I got it to load System 7.1 and found out I have 4MB RAM and an 80MB hard drive. I have an old version of ClarisWorks so I will load that and see where the SE30 takes me. It has a finicky floppy drive. It does not quite complete taking in a disk. You have to give it a final push with a probe/stick/paperclip. Ejecting is sometimes incomplete. Paperclip works well on that. I notice a white line about 1/8 inch wide running from top left to lower right so I am assuming those pixels are failing or gone.
Anyone got an idea for cleaning the floppy drive other than opening up the SE30? Bob On Dec 21, 2009, at 11:24 AM, Willi Kusche wrote: > Hi! > > On 12/21/09, Robert wrote: >> I have System 7 on disk. When I put System 6 start-up disk into the >> SE30. It booted up; ejected the disk; then loaded a print server. I >> need to get beyond that point. Can anyone make a suggestion? > > Does the SE30 boot WITHOUT booting from a floppy? If so, then > there's something wrong with your System 6 boot disk. > > Willi > > -- > ----- > You received this message because you are a member of the Vintage > Macs group. > The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and > our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml > To post to this group, send email to [email protected] > To leave this group, send email to [email protected] > For more options, visit this group at > http://groups.google.com/group/vintage-macs > > Support for older Macs: http://lowendmac.com/services/ -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/
