I think you can actually get it to boot if you turn the power switch on then off then on again really fast.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Willi Kusche Sent: Tuesday, August 17, 2010 10:29 AM To: [email protected] Subject: Re: LC wont boot Hi! On 8/17/10, Dale wrote: > I have a LCIII that powers on and boots with NO battery, just > wiil not keep the system setup parameters (date , etc) > must be the state the setup ram powers up in. Yeah, it's the LC 475 that won't boot without a good PRAM battery. Or is someone going to tell me that I'm wrong about that, too? Willi -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/
