On 17 Aug, 2013, at 3:02 am, Triston Mccarthy wrote: > I have a non apple version of the quantum pro drive lps 270s. It still works > and I have tested it but in an external enclosure the drive will not work > with my Macintosh SE. I also have a Connor CP3040a I tried it in the > enclosure it did work but only for about 5 minutes after that it just > completely crapped out and wouldn't re initialize. I would assume I probably > needs a non Apple Hard Disk Utility to actually connect the drive and be able > to mount it.
You should use the "patched HD SC Setup" to format non-Apple drives for an '030-based Mac. It's not difficult to find. It's also possible that the PSU in your enclosure is bad, since one of the drives only worked temporarily. Try to measure the voltages under load, or examine it for leaking capacitors. - Jonathan Morton -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
