Hi all, good to see the group is still going strong after many years' absence! I've got a question about a Radius Thunder 24/GT (functionally similar to the Thunder IV) recently installed in a Quadra 650. I have hooked it up to various modern flat-screen displays via a mac to vga adapter. The best resolution I can get is a stretched 1024x768. I do have its software installed. I'm assuming the card probably doesn't support 16x9 or 16x10 display ratios, since those didn't become common until so much later (please correct me if it can support these!), but these displays support 1600x1200 on other computers, so I'm wondering why I can't access higher resolutions than 1024x768 on the Quadra. Is the adapter the likely culprit? Something else about modern displays? Thanks!
-- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.