QUESTION: I have assembled the parts for what I varified are the G4 Quicksilver parts. I have fair computer assembly experience, however on this G4 Duel - when I tried to start up this set of system parts - No matter what I try I can't get the system to start.The mainboard gives the red light(I think indicating memory modules), Consider this basic configuration that I try with; This is no hard disk connected, only one ram module, I think a known good graphics card, plus correctly pressing the reset button. I have done all of the PSU voltage checks using a DVM. I am trying to start it, to only the Apple Rom that I have always thought is on the Mainboard,and I get the mainboard red LED on too. Also, I have tried two different mainboards too, Do you have any suggestions ?
-- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
