Also, Daniel, Jonathan mentioned that your 'hub may be a switch'. This is
actually not a problem.
They both basically do the same thing. They do it differently and at different
speeds but for an SE/30, this will not be an issue. It will be running at
10MB/s or slower depending on the NIC.
Just be aware that the HUB will probably not work correctly if you plug in a
crossover cable by accident. That first light 1) won't come on. Cross over
cables are generally marked CROSSOVER, X-OVER or XOVER somewhere along the
cable itself.
Not sure if you saw this page or not... Old Macintosh System Software and TCP/IP
| |
| | | | | |
| Old Macintosh System Software and TCP/IPMainly Neat Stuff -->Vintage
Networking --> Old MacintoshSystem Software and TCP/IP OldMacintosh System
Software and TCP/IP Mac System Software Primer |
| |
| View on www.vintagemacworld.com | Preview by Yahoo |
| |
| |
You should be able to do a search for asante and then copy the files onto a
floppy or a ZIP disk and bin the originals. Then shut down and restart your
SE/30
That page I mentioned also has a link to the Network Software Installer 1.5.1 -
I just checked it and it's working.
Hope this helps,
Regards,
Keith
On Wednesday, 13 May 2015, 20:56, Daniel <[email protected]> wrote:
Hi group,
Some time ago, i bought an Asante network card for my SE/30 (running 7.5.5 and
equipped with 16mb ram and a 10.1 GB harddrive (using a Acard 7720u scsi
bridge)). I installed the nic and setup the drivers from the Asante driver disc
that came with it.When reading about the MAC having problems negotiating speed
with modern routers, i also bought a 10Base-T hub from Ebay. When i start the
mac, the lights on the hub (as well as downstream) indicate that there is some
kind of connection. Looking at the daughter card on the backside of the mac, i
can see one of them lighting up (the bottom one). The other light never comes
on.When i try the diagnostics tool supplied by asante, everything up until the
nic transmission test work. The Transmission comes back with an error (telling
me that the link does not work).I run MacTCP version 2.0.6 and i have also
tried OpenTransport. I have switched from appletalk to ethernet in the "control
panel".I was thinking that it perhaps was my 10base-t hub that was incompatible
so i ordered a AUI transceiver to try that one as well. Connecting that did not
help at all.
I have since ordered and received a cross-over adapter to try to get p2p
networking going between the SE/30 and my windows 7 pc, but i'm unsure how to
configure it.
Any ideas or pointers how to perhaps get this to work?best regardsDaniel--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To leave this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups
"Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To leave this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups
"Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
